Abstract:In this paper, three 1/5 scaled reinforced concrete (RC) frame-shear wall structural models with single shear wall or cross shear walls on each floor were tested to reveal the mechanism of overturning collapse induced by failure of vertical members. A three-dimensional videogrammetric measurement technique based on high-speed cameras was adopted to acquire spatial locations and status of the moving objects. Overturning collapse was obsessed in all the three structural models after partial vertical members were removed. However, although the structural model with cross shear walls overturned, it did not disintegrate, which indicated that existence of the cross shear walls improved integrity of the structure. Meanwhile, a collapse simulation system was developed based on discrete element method (DEM). Collapse processes of the three structural models, including debris stacking, were predicted and effectiveness of removing the vertical components to simulate dynamic effects in the numerical model was verified. Experimental and numerical results revealed that overturning collapse would be initiated when a sufficient number of vertical components were removed and the flexural bearing capacities of the remaining vertical load bearing members could not resist the impact load of the upper structure for an RC frame-shear wall structure. Parametric analysis indicated that the higher the failure was located, the smaller the damage of the lower remaining structure. Moreover, if the remaining vertical load bearing structural members could not support the upper structure of a high rise building due to insufficient compressive bearing capacities, progressive collapse would take place, and cross shear walls played an important role in resisting collapse for the structure.

BLASTING COLLAPSE ANALYSIS OF SHEAR-WALL STRUCTURES

BLASTING DEMOLITION OF A 17-STOREY BUILDING IN SHEAR WALL STRUCTURE

Blasting Study on the Lengthwise Collapse of a Tall Building with a Frame Shear Wall Structure

Photogrammetry analysis of building-collapse by blasting(ⅳ)——data flow analysis and program frame design

Explosive Demolition of Anomalous Frame Shear Structure Building in Complicated Surroundings

Research on High Building Demolish by Blasting of Bidirectional Synchronization Collapse on the Same Floor

CLOSE-RANGE PHOTOGRAMMETRY ANALYSIS OF BUILDING-COLLAPSE(Ⅰ)——MOVEMENT OF BUILDING DURING BLASTING DEMOLITION

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

BLASTING DEMOLITION OF A 15-STOREY BUILDING

Simplified Analysis of the Collapse of Shelters Attached to Shear-Wall Structures with Blast Loadings

Analysis of Terrain Affecting on Building Collapse Result

Dynamic Response and Blast-Resistance Analysis of a Tunnel Subjected to Blast Loading

Two-fold Intercross Directional Blasting of Shear-wall Structure

A Two-Step Approach to Progressive Collapse Analysis of Building Structures under Blast Loading

Study on Demoliton Blasting of Water Tower with Thin Wall under Complicated Circumstances

SIMPLIFIED METHOD FOR THE ANALYSIS OF SOIL PRESSURE ON THE OVERTURNED BASEMENT SHELTER ATTACHED TO HIGH RISE BUILDINGS UNDER BLAST LOADING

EFFECTS OF CONCRETE MASONRY WALLS ON STRUCTURES UNDER NUCLEAR BLAST LOADINGS

Overturning collapse responses of RC frame-shear wall structures induced by failure of vertical members

Analysis on progressive collapse resistance of typical high-rise RC frame-shear wall structures

The mechanical response analysis of a super tall concrete structure under fire

Shear transfer mechanism of a multi-storied structural wall under the cyclic lateral load: experiment and detachment model