Abstract:High nitrogen oxide levels of the conventional diesel engine combustion often requires the introduction of exhaust gas recirculation at high engine loads. This can adversely affect the smoke emissions and fuel conversion efficiency associated with a reduction of the in-cylinder air-fuel ratio (lambda). In addition, low exhaust gas temperatures at low engine loads reduce the effectiveness of aftertreatment systems necessary to meet stringent emissions regulations. These are some of the main issues encountered by current heady-duty diesel engines. In this work, variable valve actuation–based advanced combustion control strategies have been researched as means of improving upon the engine exhaust temperature, emissions, and efficiency. Experimental analysis was carried out on a single-cylinder heady-duty diesel engine equipped with a high-pressure common-rail fuel injection system, a high-pressure loop cooled exhaust gas recirculation, and a variable valve actuation system. The variable valve actuation system enables a late intake valve closing and a second intake valve opening during the exhaust stroke. The results showed that Miller cycle was an effective technology for exhaust temperature management of low engine load operations, increasing the exhaust gas temperature by 40 °C and 75 °C when running engine at 2.2 and 6 bar net indicated mean effective pressure, respectively. However, Miller cycle adversely effected carbon monoxide and unburned hydrocarbon emissions at a light load of 2.2 bar indicated mean effective pressure. This could be overcome when combining Miller cycle with a second intake valve opening strategy due to the formation of a relatively hotter in-cylinder charge induced by the presence of internal exhaust gas recirculation. This strategy also led to a significant reduction in soot emissions by 82% when compared with the baseline engine operation. Alternatively, the use of external exhaust gas recirculation and post injection on a Miller cycle operation decreased high nitrogen oxide emissions by 67% at a part load of 6 bar indicated mean effective pressure. This contributed to a reduction of 2.2% in the total fluid consumption, which takes into account the urea consumption in aftertreatment system. At a high engine load of 17 bar indicated mean effective pressure, a highly boosted Miller cycle strategy with exhaust gas recirculation increased the fuel conversion efficiency by 1.5% while reducing the total fluid consumption by 5.4%. The overall results demonstrated that advanced variable valve actuation–based combustion control strategies can control the exhaust gas temperature and engine-out emissions at low engine loads as well as improve upon the fuel conversion efficiency and total fluid consumption at high engine loads, potentially reducing the engine operational costs.

Effect of Late Intake Valve Closing and Split Fuel Injection on Thermal Efficiency and Emissions of a Heavy Duty Diesel Engine at Middle Loads and Middle Speeds

Influence of Intake Valve Late Closing Actuator on Emission and Thermal Efficiency for Highly Boosting Diesel Engine

Numerical Investigation of the Effect of Late Intake Valve Closing on Diesel HCCI Combustion and Emissions

Multi-objective Optimization of the Combustion of a Heavy-Duty Diesel Engine with Low Temperature Combustion (LTC) under a Wide Load Range: (II) Detailed Parametric, Energy, and Exergy Analysis

Effects of Two-Mode Late Intake Valve Closing System on Diesel Engine Combustion and Emissions

Numerical Investigation of the Effect of Injection Timing on the In-Cylinder Activity of a Gasoline Direct Injection Engine

Influence of Multi-Injection on Combustion and Emission of Diesel Engine

Effects of multiple injections on combustion and emissions in a heavy-duty diesel engine at high load and low speed

Numerical Evaluation of the Potential of Late Intake Valve Closing Strategy for Diesel Pcci (premixed Charge Compression Ignition) Engine in A Wide Speed and Load Range

Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine

Full Engine Cycle CFD Investigation of Effects of Variable Intake Valve Closing on Diesel PCCI Combustion and Emissions

Exploring alternative combustion control strategies for low-load exhaust gas temperature management of a heavy-duty diesel engine

Study of Pilot Injection for the Improvement of Combustion and Emissions Characteristics in A Heavy-Duty Diesel Engine

Combined Effects of Pilot Quantity, Injection Pressure and Dwell Periods on the Combustion and Emissions Behaviour of a Modern V6 Diesel Engine

Effect of Post-Injection on Combustion and Exhaust Emissions in DI Diesel Engine

An experimental investigation of the combustion process and the injection strategy of a heavy-duty diesel engine equipped with a common rail fuel injection system

Study on Diesel Combustion and Emission Based on Injection Timing

Effect of diesel late-injection on combustion and emissions characteristics of diesel/methanol dual fuel engine

Experimental Study on the Influence of Injection Timing on Combustion and Emission of Biodiesel Engine Based on Mechanical Mechanics

Numerical Investigation of the Influence of Intake Valve Lift Profile on A Diesel Premixed Charge Compression Ignition Engine with A Variable Valve Actuation System at Moderate Loads and Speeds

Effect of Egr and Injection Timing on Combustion and Emission Characteristics of Split Injection Strategy Di-Diesel Engine Fueled with Biodiesel