Abstract:High nitrogen oxide levels of the conventional diesel engine combustion often requires the introduction of exhaust gas recirculation at high engine loads. This can adversely affect the smoke emissions and fuel conversion efficiency associated with a reduction of the in-cylinder air-fuel ratio (lambda). In addition, low exhaust gas temperatures at low engine loads reduce the effectiveness of aftertreatment systems necessary to meet stringent emissions regulations. These are some of the main issues encountered by current heady-duty diesel engines. In this work, variable valve actuation–based advanced combustion control strategies have been researched as means of improving upon the engine exhaust temperature, emissions, and efficiency. Experimental analysis was carried out on a single-cylinder heady-duty diesel engine equipped with a high-pressure common-rail fuel injection system, a high-pressure loop cooled exhaust gas recirculation, and a variable valve actuation system. The variable valve actuation system enables a late intake valve closing and a second intake valve opening during the exhaust stroke. The results showed that Miller cycle was an effective technology for exhaust temperature management of low engine load operations, increasing the exhaust gas temperature by 40 °C and 75 °C when running engine at 2.2 and 6 bar net indicated mean effective pressure, respectively. However, Miller cycle adversely effected carbon monoxide and unburned hydrocarbon emissions at a light load of 2.2 bar indicated mean effective pressure. This could be overcome when combining Miller cycle with a second intake valve opening strategy due to the formation of a relatively hotter in-cylinder charge induced by the presence of internal exhaust gas recirculation. This strategy also led to a significant reduction in soot emissions by 82% when compared with the baseline engine operation. Alternatively, the use of external exhaust gas recirculation and post injection on a Miller cycle operation decreased high nitrogen oxide emissions by 67% at a part load of 6 bar indicated mean effective pressure. This contributed to a reduction of 2.2% in the total fluid consumption, which takes into account the urea consumption in aftertreatment system. At a high engine load of 17 bar indicated mean effective pressure, a highly boosted Miller cycle strategy with exhaust gas recirculation increased the fuel conversion efficiency by 1.5% while reducing the total fluid consumption by 5.4%. The overall results demonstrated that advanced variable valve actuation–based combustion control strategies can control the exhaust gas temperature and engine-out emissions at low engine loads as well as improve upon the fuel conversion efficiency and total fluid consumption at high engine loads, potentially reducing the engine operational costs.

Effects of Two-Mode Late Intake Valve Closing System on Diesel Engine Combustion and Emissions

Influence of Intake Valve Late Closing Actuator on Emission and Thermal Efficiency for Highly Boosting Diesel Engine

Effects of Key Parameters of Diesel Late Intake Valve System on Intake Performance

Numerical Investigation of the Effect of Late Intake Valve Closing on Diesel HCCI Combustion and Emissions

Numerical Investigation of the Influence of Intake Valve Lift Profile on A Diesel Premixed Charge Compression Ignition Engine with A Variable Valve Actuation System at Moderate Loads and Speeds

Numerical Investigation of the Effect of Two-Stage Injection Strategy on Combustion and Emission Characteristics of a Diesel Engine

Full Engine Cycle CFD Investigation of Effects of Variable Intake Valve Closing on Diesel PCCI Combustion and Emissions

Improvement of Emission Performance of Two-stroke Diesel Engines with Two-stage Injection

Effects of additional lift curve on intake state of diesel engine with variable valve

Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine

Numerical Evaluation of the Potential of Late Intake Valve Closing Strategy for Diesel Pcci (premixed Charge Compression Ignition) Engine in A Wide Speed and Load Range

Effect of diesel late-injection on combustion and emissions characteristics of diesel/methanol dual fuel engine

Effects of Intake Throttling on Low Load Performance of Diesel Engine

Influence of Multi-Injection on Combustion and Emission of Diesel Engine

The Effects of Partially Premixed Combustion Mode on the Performance and Emissions of a Direct Injection Natural Gas Engine

Optimization Match Between IVCA and Two Stage Turbocharged System of Diesel Engines Under Low Speed Condition

Effects of Enriched Oxygen and Nitrogen Intake on Combustion Process and Emission Features in A Diesel Engine

The effects of advanced angle,inlet air pressure & cooling water temperatare on diesel emission

Valve Timing Based Optimization of Diesel Engine with High Exhaust Back Pressure

Effects of integrated aftertreatment system on regulated and unregulated emission characteristics of non-road methanol/diesel dual-fuel engine

Influence of Intake Closing Timing on Gas Exchange Process in Internal Combustion Engine