Abstract:High nitrogen oxide levels of the conventional diesel engine combustion often requires the introduction of exhaust gas recirculation at high engine loads. This can adversely affect the smoke emissions and fuel conversion efficiency associated with a reduction of the in-cylinder air-fuel ratio (lambda). In addition, low exhaust gas temperatures at low engine loads reduce the effectiveness of aftertreatment systems necessary to meet stringent emissions regulations. These are some of the main issues encountered by current heady-duty diesel engines. In this work, variable valve actuation–based advanced combustion control strategies have been researched as means of improving upon the engine exhaust temperature, emissions, and efficiency. Experimental analysis was carried out on a single-cylinder heady-duty diesel engine equipped with a high-pressure common-rail fuel injection system, a high-pressure loop cooled exhaust gas recirculation, and a variable valve actuation system. The variable valve actuation system enables a late intake valve closing and a second intake valve opening during the exhaust stroke. The results showed that Miller cycle was an effective technology for exhaust temperature management of low engine load operations, increasing the exhaust gas temperature by 40 °C and 75 °C when running engine at 2.2 and 6 bar net indicated mean effective pressure, respectively. However, Miller cycle adversely effected carbon monoxide and unburned hydrocarbon emissions at a light load of 2.2 bar indicated mean effective pressure. This could be overcome when combining Miller cycle with a second intake valve opening strategy due to the formation of a relatively hotter in-cylinder charge induced by the presence of internal exhaust gas recirculation. This strategy also led to a significant reduction in soot emissions by 82% when compared with the baseline engine operation. Alternatively, the use of external exhaust gas recirculation and post injection on a Miller cycle operation decreased high nitrogen oxide emissions by 67% at a part load of 6 bar indicated mean effective pressure. This contributed to a reduction of 2.2% in the total fluid consumption, which takes into account the urea consumption in aftertreatment system. At a high engine load of 17 bar indicated mean effective pressure, a highly boosted Miller cycle strategy with exhaust gas recirculation increased the fuel conversion efficiency by 1.5% while reducing the total fluid consumption by 5.4%. The overall results demonstrated that advanced variable valve actuation–based combustion control strategies can control the exhaust gas temperature and engine-out emissions at low engine loads as well as improve upon the fuel conversion efficiency and total fluid consumption at high engine loads, potentially reducing the engine operational costs.

Optimization Match Between IVCA and Two Stage Turbocharged System of Diesel Engines Under Low Speed Condition

Optimization Match between IVCA and Turbocharged System at Middle Load in Diesel Engines

Effect of Optimization Matching Between Post Injection Technology and Two-Stage Turbocharging System on Combustion Process

A Study on an Automatically Variable Intake Exhaust Injection Timing Turbo-Charging System for Diesel Engines

Influence of Intake Valve Late Closing Actuator on Emission and Thermal Efficiency for Highly Boosting Diesel Engine

Study of a Hybrid Pneumatic-Combustion Engine under Steady-State and Transient Conditions for Transport Application

Optimization of combustion process for non-road heavy-duty diesel engines

Effect of Turbine Adjustment Methods on Matching Performance of Turbocharged Diesel Engine

Valve Timing Based Optimization of Diesel Engine with High Exhaust Back Pressure

Simulation and Experimental Research on a Mixed Pulse Converter Turbocharging System

Performance Optimization of Diesel Engine with Electro-Hydraulic Driven Valves

A Method for Matching Two-Stage Turbocharger System and Its Influence on Engine Performance

Effects of Two-Mode Late Intake Valve Closing System on Diesel Engine Combustion and Emissions

Investigation of Influence of Two-Stage Turbocharging System on Engine Performance Using A Pre-Design Model

Simulation and Optimization of Low Temperature Combustion in Diesel Engine at High Load

Exhaust Emission and Thermal Efficiency of Vehicle Heavy Duty Diesel Engine at Low Load

Effective measures to improve thermal efficiency of medium-sized diesel engine in practical application: Energy-exergy analysis and test verification

Application of CFD, Taguchi Method, and ANOVA Technique to Optimize Combustion and Emissions in a Light Duty Diesel Engine

Research on low temperature combustion of homogeneous charge induced ignition (HCII) in a light-duty diesel engine

Variable valve actuation–based combustion control strategies for efficiency improvement and emissions control in a heavy-duty diesel engine

Applicability of Variable-Geometry Turbocharger for Diesel Generators under High Exhaust Back Pressure