Abstract:The present research explores the electrochemical corrosion characteristics of Mg–Zn–Gd (rare earth—RE) alloy and Mg–Zn–Gd–ZnO nanocomposites. A unique stir-ultrasonication followed by squeeze casting technique was used to develop the alloy and nanocomposites. T5 heat-treated Mg alloys and Mg nanocomposite samples were subjected to an electrochemical corrosion test in a solution of 3.5 wt.% NaCl-concentrated demineralized water. The addition of Gd alloying element and ZnO nanoreinforcements combined with squeeze casting led to the finer grains in the Mg nanocomposites. Scanning electron microscopy (SEM) images validate the homogeneous dispersion of nano-ZnO in the Mg matrix. The MgZn precipitates were observed in X-ray diffraction analysis (XRD) peaks and Transmission electron microscopy (TEM) analysis. The hardness results revealed a 34% enhancement in the microhardness of the nanocomposite with 0.2% Gd and 2% ZnO as compared to the base alloy. Electrochemical impedance spectroscopy analysis was performed on the fabricated samples to identify the instantaneous corrosion effect. The reduction in the removal of metal ions was observed during the electrochemical test with a voltage range of − 0.5 to 0.5 V and a 1.92E−05 A/cm 2 current density at 1800 s. The enhanced corrosion resistance observed in nanocomposites could be attributed to the presence of a finer grain arrangement, good interfacial strength, and the formation of passivation layers and precipitates in the nanocomposite samples.

Investigation of Improving Corrosion Resistance of C Fibre Reinforced Magnesium Matrix Composites by Permeating Rare Earths

Improving Corrosion Resistance of C_f/Mg Composites using Rare Earth Conversion Coatings

Study of Environment-Friendly Rare Earth Conversion Coating for Corrosion Resistance on Gr/6061 Al Composites Surface

Investigation of Improving Corrosion Resistance of Magnesium Alloys by Permeating Rare Earths

Study on Anticorrosive Cerium Conversion Coating of Cf/6061Al Composite Surface

Improved Corrosion Resistance of Al2O3 Ceramic Coatings on AZ31 Magnesium Alloy Fabricated Through Cathode Plasma Electrolytic Deposition Combined with Surface Pore-Sealing Treatment

Effect of Ce Conversion Coating for Corrosion Resistance on Grf/6061 AI Composites Surface

Study Of Cerium And Lanthanum Conversion Coatings On Az63 Magnesium Alloy Surface

Effect of Rare Earth on Micro-Arc Oxidation of Mg Alloy

Progress in Research of Rare Earth Conversion Coatings on Magnesium Alloys

Electrochemical Study of Corrosion Behavior of Rare Earth Based Chemical Conversion Coating on Aerospace Aluminum Alloy

Preparation and corrosion resistance of rare earth conversion coatings on AZ91 magnesium alloy

Electrochemical Corrosion Behavior of Composite MAO/sol–gel Coatings on Magnesium Alloy AZ91D Using Combined Micro-Arc Oxidation and Sol–gel Technique

Preparation and corrosion resistance of rare earth–silane composite conversion coatings on magnesium–lithium alloy surface

Role of Rare Earth Gadolinium and ZnO Nanoparticles on the Electrochemical Corrosion Behavior of Mg Nanocomposites Produced by Stir-Ultrasonication and Squeeze Casting

Research Progress of Corrosion Resistance of Magnesium Alloys Strengthened by Rare-earth

Research on Cerium Conversion Coating Process and Properties of Magnesium Alloy

Study of Corrosion Resistance and Anti-corrosion Mechanism of Rare Earth Conversion Coatings on Zinc Plating in 5%nacl Solution

Composition, Structure and Properties of Rare Earth Metal Conversion Coating on Al 6061/SiCp

STUDY OF RARE EARTH METAL(REM) CONVERSION COATING ONALUMINUM-BASED METAL MATRIX COMPOSITES(MMC) Al6061/SiCP

Composite Coatings Prepared by Combined Plasma Electrolytic Oxidation and Chemical Conversion Routes on Magnesium-Lithium Alloy