Abstract:Based on environmentally friendly and recycling of magnesium alloys, chemical conversion coatings were prepared in aluminum nitrate solutions with cerium nitrate additive on AZ91D magnesium alloys surfaces. Effect of additive's concentration on the surface morphology, composition and corrosion resistance of aluminum-based conversion coating on magnesium alloys was studied. The surface morphology, composition, microstructure and corrosion resistance of conversion coatings were investigated using scanning electron microscopy (SEM), X-ray energy dispersion spectrometry (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and electrochemical tests respectively. The results show that the cerium content of the conversion coatings surface increased with increasing additive concentration. The conversion coatings' morphologies first gradually became dense and the micro-cracks on the coating surface became narrow with the increase of the additive concentration. Then the coatings' morphologies became bad and the micro-cracks widened after the additive concentration reached 0.005 mol/L. When the additive concentration was 0.005 mol/L, the conversion coating consists of Al(OH)(3), Al2O3, Mg(OH)(2), MgO, CeO2 and Ce2O3; the conversion coating surface morphology was the densest and the micro-cracks were the narrowest, and the corrosion resistance was also the best. (C) 2013 Elsevier B.V. All rights reserved.

Research on Cerium Conversion Coating Process and Properties of Magnesium Alloy

Formation and characterization of cerium conversion coatings on magnesium alloy

Effect of Cerium Additive on Aluminum-Based Chemical Conversion Coating on Az91d Magnesium Alloy

PREPARATION AND CORROSION ELECTROCHEMISTRY BEHAVIOR OF CERIUM-BASED CHEMICAL CONVERSION COATING ON AZ91 MAGNESIUM ALLOY

Study Of Cerium And Lanthanum Conversion Coatings On Az63 Magnesium Alloy Surface

Progress in Research of Rare Earth Conversion Coatings on Magnesium Alloys

Preparation and corrosion resistance of rare earth conversion coatings on AZ91 magnesium alloy

Surface characterization of growth process for cerium conversion coating on magnesium alloy and its anticorrosion mechanism

Rare Earth Lanthanum Conversion Treatment of Magnesium Alloy

Cerium and Silane Conversion Coatings on AZ91 Magnesium Alloy

Study on Technological Process of Cerium-Based Conversion Coating on Aluminum

Densification process of cerium-based conversion coatings on AZ31 magnesium alloy

Study of Environment-Friendly Rare Earth Conversion Coating for Corrosion Resistance on Gr/6061 Al Composites Surface

Process of rare earth conversion coating on the surface of graphite fiber reinforcement aluminum matrix composites

Preparation and corrosion resistance studies of nanometric sol–gel-based CeO2 film with a chromium-free pretreatment on AZ91D magnesium alloy

Organic-magnesium complex conversion coating on AZ91D magnesium alloy

Corrosion Resistance of Cerium-Doped Zinc Calcium Phosphate Chemical Conversion Coatings on AZ31 Magnesium Alloy

Influence of Treating Temperatures on Properties and Performances of Cerium Conversion Coatings on Magnesium Alloys

INVESTIGATION ON CHROMIUM-FREE CONVERSION COATING ON AZ91D MAGNESIUM ALLOY

Cerium Conversion Coatings for AZ91D Magnesium Alloy in Ethanol Solution and Its Corrosion Resistance