Abstract:A novel synthetic method is developed to prepare nano-sized FePO4 powders used as cathode materials of lithium ion batteries. The samples are prepared via a microemulsion system in a H2O/cyclohexane/Triton x-100/n-butyl alcohol, and then sinter at different temperatures (380 degrees C, 460 degrees C, 550 degrees C, 650 degrees C) for 3h. The thermal stability, structure, morphology and particle size are investigated by means of TG/DSC, X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), and the electrochemical properties are characterized by cyclic voltammetry (CV) and galvanostatic charge and discharge tests. Results show the grain size of FePO4 particles sintered at 460 degrees C and 380 degrees C for 3h ranges from 10nm to 20nm, and the crystal structure is amorphous. The initial discharge specific capacity of FePO4 cathode sintered at 460 degrees C for 3h reaches 139mAhg(-1) and 110mAh/g, respectively, at 0.1C and 0.3C. Increasing sintering temperature leads to the small particles agglomeration and the crystalline growth, and the crystal structure changes from amorphous to trigonal when the sintering temperature is up to 550 degrees C. The discharge specific capacity also decreases with the increase of the sintering temperature. These results suggest that nano-sized particles and amorphous structure can significantly improve the performances of FePO4 cathode.

Particle size sensitivity of electrochemical performance for hydrothermally synthesized LiFePO4/C cathode material

Effect of Particle Size of Li3PO4 on LiFePO4 Cathode Material Properties Prepared by Hydrothermal Method

Electrochemical performance studies of Li-rich cathode materials with different primary particle sizes

Effect of particle size on electrochemical performance of lithium iron phosphate materials

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries

Effects of particle size and carbon coating on electrochemical properties of LiFePO4/C prepared by hydrothermal method

Synthesis of Size-controllable LiFePO<sub>4</sub>/C Cathode Material by Controlled Crystallization

Synthesis of nano FePO 4 and electrochemical characterization of composite cathode material LiFePO 4/C

Synthesis of LiFePO4/C Composite Cathode Materials by Solid State Method Using Mixed Iron Sources

Hydrothermal Synthesis of Well-dispersed LiMn0.7Fe0.3PO4/C Nanocrystalline Cathodes for Lithium-ion Batteries

Synthesises, Characterizations and Electrochemical Properties of Spherical-Like LiFePO4 by Hydrothermal Method

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Effect of precursor FePO_4·2H_2O on electrochemical properties of LiFePO_4

Synthesis of Nano-Sized FePO4 Cathode Material via a Microemulsion Technique

Hydrothermal Synthesis of LiMn0.79Fe0.2Mg0.01PO4/C Composite Cathode Materials Using Different Li3PO4 Precursors

Synthesis and electrochemical properties of LiFePO4/C composite cathode materials

Effect of Synthesis Temperature on the Structure and Electrochemical Performances of LiFePO4/C

Synthesis of Li2FeP2O7 Cathode Material at Different Temperatures and Its Electrochemical Performance for Lithium Ion Batteries

Study on the Preparation of Lifepo4 by Hydrothermal Method

Synthesis of Nano-Sized FePO<sub>4</sub> Cathode Material via a Microemulsion Technique

Synthesis of Nano-Sized FePO<sub>4</sub> Cathode Material Via a Microemulsion Technique