Abstract:LiFePO4 is the new generation cathode material for lithium ion batteries. To improve the powders’ pile density is considered as the important researching direction. One effective way is to prepare powders composed of spherical particles. Spherical amorphous FePO4·xH2O powders were synthesized by controlled crystallization method, using Fe(NO3)3, H3PO4 and NH3 as the raw materials. The FePO4·xH2O powders were pre-heat treated at 520°C for 20h in air to obtain spherical hexagonal FePO4 powders. The FePO4 powders were homogeneously mixed with Li2CO3, Cr(NO3)3 and sucrose with certain molar ratios, and then sintered at 800°C for 16h in N2. The spherical olivine Li0.97Cr0.01FePO4/C powders were finally obtained through carbothermal reduction process. The composition, structure, morphology, and physicochemical properties of FePO4·xH2O, FePO4 and Li0.97Cr0.01FePO4/C powders were characterized in detail by DTA/TGA, ICP, XRD, SEM, XPS, laser particle size analysis, and tap-density testing. It is observed the tap-density of the spherical Li0.97Cr0.01FePO4/C powders is as high as 1.8gcm−3, which is remarkably higher than the non-spherical LiFePO4 powders reported. At current of 0.005, 0.05, 0.1, 0.25 and 1.0C, the composite cathode materials have initial discharge specific capacity of 163, 151, 142, 131 and 110mAhg−1, respectively. The material also shows excellent cycling performance. The high-density spherical Li0.97Cr0.01FePO4/C cathode material can be used in the lithium ion batteries to greatly increase the batteries’ energy density. To further improve the material's pile density and rate capability is considered as the researching direction.

Synthesis of Li2FeP2O7 Cathode Material at Different Temperatures and Its Electrochemical Performance for Lithium Ion Batteries

Electrochemical properties of Li 2 FeP 2 O 7 cathode material synthesized by using different lithium sources

Studies on Electrochemical Property of LiFePO4/C as Cathode Material for Lithium Ion Batteries

Synthesis And Electrochemical Properties Of Li2fesio4/C As Cathode Materials For Lithium-Ion Batteries

Synthesis of Nano-Sized FePO<sub>4</sub> Cathode Material via a Microemulsion Technique

Synthesis of Nano-Sized FePO<sub>4</sub> Cathode Material Via a Microemulsion Technique

Synthesis and Electrochemical Performances of Nano-Particle Fepo4 and Ce-Doped Fepo4 Cathode Materials for Lithium Ion Batteries by Microemulsion Method

Synthesis of Nano-Sized FePO4 Cathode Material via a Microemulsion Technique

Preparation of Li2fesio4/C Composite Cathode Materials for Lithium Ion Batteries by Carbothermal Reduction Method

Preparation of Li<sub>2</sub>FeSiO<sub>4</sub>/C Composite Cathode Materials for Lithium Ion Batteries by Carbothermal Reduction Method

Synthesis of LiFePO4/C Composite Cathode Materials by Solid State Method Using Mixed Iron Sources

Physical and Electrochemical Properties of Li<sub>2-x</sub>FeSiO<sub>4</sub>/C Cathode Material for Li-Ion Batteries

LiFePO4 Cathode Materials with Enhanced Performance Prepared by a Novel Solid-State Method

One-Step Solid-State Synthesis And High-Temperature Electrochemical Performance Of Carbon Coated Lifepo4 Cathode

Synthesis and electrochemical properties of LiFePO4 cathode material by ionic thermal method using eutectic mixture of tetramethyl ammonium chloride–urea

Preparation of lithium iron phosphate with superior electrochemical performances from titanium white by-product ferrous sulfate

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

The Low and High Temperature Electrochemical Performances of Li3V2(PO4)3/C Cathode Material for Li-ion Batteries

Preparation and Characterization of High-Density Spherical Li0.97Cr0.01FePO4/C Cathode Material for Lithium Ion Batteries

Effect of Sintering-method on Electrochemical Performance of LiFePO_4/C Cathode Material

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries