Abstract:Acoustic emission (AE) source location is an effective method used to reveal the deformation and damage characteristics of materials. Improving the positioning accuracy of AE events is extremely important for both experimental research and engineering practice. An experiment was performed on a standard rock specimen to investigate the key factors that affect the positioning accuracy of an AE event, such as the computational combinations and spatial layout of the sensors and the picking accuracy of the first arrival signal. The results show that as the number of sensors involved in the positioning calculation increases, both the maximum and average positioning errors clearly decrease, and the positioning accuracy increases. Meanwhile, a better result is achieved when the number of sensors involved in the positioning calculation reaches three-fourths of the total number of monitoring sensors used. Under this condition, both the minimum positioning error and the error dispersion are sufficiently low, and the reliability of the positioning results is greatly improved. Furthermore, when different types of and deviations in the first arrival signal are used for the location calculation of the same AE event, the positioning results are quite different, and large errors are found. Finally, the accurate positioning of an AE event is realized by adjusting the number of sensors and improving the picking accuracy of the first arrival time of the signal. The maximum reduction in the positioning error achieved is 96.62%, and the minimum reduction is 57.61%. Hence, the positioning error decreases significantly. The investigation results can provide an important reference for the precise positioning of AE events involved in experimental research and engineering.

Study on Measurement of Impact Point Coordinates with the Combination of Acoustic Array and Optical Detection

Research on Endpoint Detection Algorithm in High Altitude Explosion Point Location Technology

Measurement principle of acoustic target with two equilateral triangle array

Studies of acoustic target with two equilateral triangle arrays

Research on Sensors Array Model Based on Acoustic Target

Study on Projectile Impact Point Positioning Model Based on Diamond-Shaped Array

Measurement of impact points using reflective light screen target of single column light source

Study Of The Bullet Position Measuring Model With Six Light Screens

Effect of several factors on target localization of arbitrary planar three-element acoustic array

Research on Intersection Measurement Precision of CCD Optical Target in Theory

The Method of Impact Point Location Based on Planar Double Disk Array

Light Curtain Target Point Coordinate Measuring Method

Large-scale Coordinates Measurement Method Based on Intersection of Optical Planes

Accurate Positioning of Missile Fall Points through Acoustic and Optical Properties of Explosion

Principle and analysis of high altitude projectile location measurement using multi-screen target method

Study on Optimization and Performance of Four-element Acoustic Sensors Array

Improving the Positioning Accuracy of Acoustic Emission Events by Optimizing the Sensor Deployment and First Arrival Signal Picking.

A New Rapid Positioning Strategy for the Impact-Point Using Dynamic Mode Decomposition and Time Difference of Arrival *

Research on the Intersection Measuring System Consisting of Multiple CCDs in Theory

Research and Implementation of Velocity and Position Measurement Method of Projectile

Study of Acoustic Position for Moving Sources in Low Sky with a Small Spatial Array