Abstract:Phase-transformations and microstructural evolution during and after inter-critical annealing of a low-alloy, dual-phase steel are studied utilizing dilatometric measurements, and microstructural characterization methods, including scanning electron microscopy, synchrotron X-ray diffraction, and atom-probe tomography. Dilatometric measurements reveal that the sample contains ~72% austenite, after annealing for 5-min at 871 oC, which agrees with the water-quenched microstructure, and ~90% after further annealing to 1 h, which agrees with thermodynamic predictions. A continuous-cooling transformation (CCT) diagram is constructed, within the cooling-rate range between 1 oC/s and 70 oC/s. The incubation time for the ferrite-transformation is <1 s, after inter-critical annealing, and the secondary-phases are mainly pearlite for cooling-rates of <5 oC/s, and martensite for cooling-rates >10 oC/s, which is confirmed utilizing scanning electron-microscope observations. The microhardness increases as the cooling rate increases, and an abrupt slope-change is explained by the major secondary-phase changing from martensite to pearlite between 5 oC/s and 10 oC/s. Atom-probe tomography demonstrates the coexistence of martensite and pearlite as secondary-phases for 30 oC/s and a switch in austenite-ferrite transformation mechanisms from para-equilibrium (70 oC/s) to partitioning local-equilibrium (30 oC/s). A microstructural map is constructed to reveal the austenite decomposition products in the cooling-rate range between 1 oC/s and 70 oC/s. Based on composition measurements of the matrix, utilizing APT, the effects of cooling-rates on solid-solution-strengthening are estimated, and the results demonstrate that solid-solution strengthening, especially carbon-redistribution, accounts for the majority of the strength variations due to different cooling-rates. (239 words)

The Transition Latent Heat of Austenite Phase Transition in Air-cooled Conditions

Austenite phase transformation of thermal analysis

Experimental Investigation on Determinant of Steel Specimen Transformation Temperature under Air Cooling Conditions

Phase transition kinetics and microstructures of A508-3 steel under continuous cooling process

Temperature Field Simulation of Air Cooling Condition 40cr ANSYS

Transition Between Alloy–element Partitioned and Non-Partitioned Growth of Austenite from a Ferrite and Cementite Mixture in a High-Carbon Low-Alloy Steel

Latent Heat of TB18 Titanium Alloy during to a Phase Transition by DSC and First-Principles Methods

Formulation of Austenite Continuous Cooling Transformation Curves for Austenite Phase of Steel

Atom-probe tomographic and dilatometric studies of phase-transformations after inter-critical annealing of a low-carbon dual-phase steel

Latent Heat of TB18 Titanium Alloy during β to α Phase Transition by DSC and First-Principles Methods

In-situ Observation of Phase Transformation During Heat Treatment Process of High-Carbon Bainitic Bearing Steel

Numerical Simulation on Austenitization of Cast Steel During Heating Process

Computation of Phase Fractions in Austenite Transformation with the Dilation Curve for Various Cooling Regimens in Continuous Casting

Study of Phase Transformations and Interface Evolution in Carbon Steel under Temperatures and Loads Using Molecular Dynamics Simulation

Tracing Phase Transformation And Lattice Evolution In A Trip Sheet Steel Under High-Temperature Annealing By Real-Time In Situ Neutron Diffraction

Computational Thermodynamics/kinetics Aided Design for the Microstructure of Pearlitic Steels During Cooling Process

Prediction of the Non-Isothermal Austenitization Kinetics of Fe-C-Cr Low Alloy Steels with Lamellar Pearlite Microstructure

EXPERIMENTAL STUDY AND NUMERICAL PREDICTION OF PHASE TRANSFORMATION EVOLUTION DURING TEMPERING PROCESS OF MARTENSITE

Modeling of Austenite Decomposition during Continuous Cooling Process in Heat Treatment of Hypoeutectoid Steel with Cellular Automaton Method

Continuous Cooling Phase Transformation Rule of 20crmnti Low-Carbon Alloy Steel

THE PRACTICAL CORRECTION RESEARCH ON CCT CURVES OF HOT DEFORMATION AUSTENITE