Abstract:Phase-transformations and microstructural evolution during and after inter-critical annealing of a low-alloy, dual-phase steel are studied utilizing dilatometric measurements, and microstructural characterization methods, including scanning electron microscopy, synchrotron X-ray diffraction, and atom-probe tomography. Dilatometric measurements reveal that the sample contains ~72% austenite, after annealing for 5-min at 871 oC, which agrees with the water-quenched microstructure, and ~90% after further annealing to 1 h, which agrees with thermodynamic predictions. A continuous-cooling transformation (CCT) diagram is constructed, within the cooling-rate range between 1 oC/s and 70 oC/s. The incubation time for the ferrite-transformation is <1 s, after inter-critical annealing, and the secondary-phases are mainly pearlite for cooling-rates of <5 oC/s, and martensite for cooling-rates >10 oC/s, which is confirmed utilizing scanning electron-microscope observations. The microhardness increases as the cooling rate increases, and an abrupt slope-change is explained by the major secondary-phase changing from martensite to pearlite between 5 oC/s and 10 oC/s. Atom-probe tomography demonstrates the coexistence of martensite and pearlite as secondary-phases for 30 oC/s and a switch in austenite-ferrite transformation mechanisms from para-equilibrium (70 oC/s) to partitioning local-equilibrium (30 oC/s). A microstructural map is constructed to reveal the austenite decomposition products in the cooling-rate range between 1 oC/s and 70 oC/s. Based on composition measurements of the matrix, utilizing APT, the effects of cooling-rates on solid-solution-strengthening are estimated, and the results demonstrate that solid-solution strengthening, especially carbon-redistribution, accounts for the majority of the strength variations due to different cooling-rates. (239 words)

Experimental Investigation on Determinant of Steel Specimen Transformation Temperature under Air Cooling Conditions

The Transition Latent Heat of Austenite Phase Transition in Air-cooled Conditions

Predication Method of Transformation Temperature of Metal Under Air Cooling Condition

Atom-probe tomographic and dilatometric studies of phase-transformations after inter-critical annealing of a low-carbon dual-phase steel

Computational Thermodynamics/kinetics Aided Design for the Microstructure of Pearlitic Steels During Cooling Process

Continuous Cooling Phase Transformation Rule of 20crmnti Low-Carbon Alloy Steel

THE PRACTICAL CORRECTION RESEARCH ON CCT CURVES OF HOT DEFORMATION AUSTENITE

Continuous Cooling Transformation of Overcooling Austenite and Structure Evolution of Si Steel

Dynamic continuous cooling transformation, microstructure and mechanical properties of medium-carbon carbide-free bainitic steel

Dilatometric Research on Pearlite-to-austenite Transformation of Fe–1C–1.44Cr Low-Alloy Steel

In-situ Study on Γ Phase Transformation Behaviour of Γ-Tial Alloys at Different Cooling Rates

Dynamic Continuous Cooling Transformation Behavior Of A Novel Cu-Bearing Pipeline Steel

Calculation of the residual stress of a 45 steel cylinder with a non-linear surface heat-transfer coefficient including phase transformation during quenching

Effect of deformation degree and temperature on continuous cooling transformation of 40Cr steel

STUDY ON PRECIPITATION BEHAVIOR OF PHASES CONTAINING Cu IN THE Cu-BEARING STEEL IN CONTINUOUS COOLING PROCESS

Continuous Cooling Transformation Curve of a Weathering Steel

Formulation of Austenite Continuous Cooling Transformation Curves for Austenite Phase of Steel

Quantitative characterization of lamellar α precipitation behavior of IMI834 Ti-alloy in isothermal and non-isothermal heat treatments

Temperature Field Simulation of Air Cooling Condition 40cr ANSYS

In-situ Observation of Phase Transformation During Heat Treatment Process of High-Carbon Bainitic Bearing Steel

Research on Continuous Cooling Transformation Rule of High Strength Ship Steel