Abstract:Coarsening or Oswald ripening, induced by interbubble gas diffusion, is considered to dominate foam structure evolution in porous media. We present the first study of trapped foam coarsening dynamics under realistic deep reservoir conditions (up to 3200 psi/22 MPa of pore pressure and 100 °C of temperature) in a high-pressure and high-temperature microfluidic system. The findings are expected to help predict foam structure evolution in applications such as enhanced oil recovery and CO2 geological sequestration. It is shown that, in porous media, larger bubbles grow at the expense of smaller bubbles. The growth rate of the average bubble area (⟨a⟩) over time shows a long-term linear increase when ⟨a⟩ is between 1/5 and 1/2 of the average pore size. The foam coarsening kinetics are determined by the liquid film permeability, gas-liquid interfacial tension, and the molar volume of the dispersed phase. In summary, foams prepared with less water-soluble gases (e.g., N2 and air) and lower foam quality show slower coarsening kinetics due to a lower film permeability. Foam coarsening is more sensitive to surfactant concentration (than surfactant type), as it determines the interfacial tension that controls the mass transfer driving force (capillary pressure difference). The transport properties of the dispersed phase depend strongly on its density, which increases with increasing pore pressure and decreasing temperature. At the same experimental conditions, gas CO2 foam shows a 10-fold faster coarsening rate than N2 foam. However, dense (i.e., liquid and supercritical) CO2 foams show a remarkable 20-500-fold reduction in coarsening kinetics compared with gas N2 and CO2 foams due to the significantly reduced mass transfer driving forces. In a sense, trapped CO2 foam can be stronger than N2 foam at high-pressure and high-temperature conditions.

Nucleation Behavior of Carbon Foam During Self Bubbling Process

Preparation and Foaming Mechanism of Carbon Foams by Supercritical Foaming Method

Preparation and Performance of Mesophase Pitch Based Carbon Foam

Preparation and Performance of Mesophase Pitch Based Graphite Foam

Preparation of Reinforced Carbon Foams with Different Fillers

Effect of Iron Nitrite on the Preparation of Carbon Foams from Mesophase Pitch

Pore Structure Control of Si3n4 Ceramics Based on Particle-Stabilized Foams

Effect of Cohesive Particle Addition on Bubbling Characteristics of Gas-Solid Fluidized Bed: Meso-scale Mechanism

A porous carbon foam prepared from liquefied birch sawdust

Effects of coal characteristics on the structure and performance of coal-based carbon foam prepared by self-foaming technique under atmospheric pressure

Study on the definition, mechanism and controllability of secondary bubbles based on the bubble nucleation model in injection foaming polypropylene

Preparation of Si3N4 Foam Ceramics Using Short-Chain Amphiphile

Molecular dynamics simulation of bubble nucleation in Carbon Dioxide/Hexadecane Solution as an analog to foaming of polyethylene by Super Critical Carbon Dioxide

Investigation of Pore-Scale Behaviors of Foam Flow in a Polydimethylsiloxane Micromodel

Study on particle-stabilized Si3N4 ceramic foams

Microfluidic Investigation of Foam Coarsening Dynamics in Porous Media at High-Pressure and High-Temperature Conditions

Preparation of carbon foams with supercritical toluene

Molecular Dynamics Study on the Combined Effects of the Nanostructure and Wettability of Solid Surfaces on Bubble Nucleation.

Experimental and modeling study of foam coarsening kinetics in porous media

STRUCTURE AND PROPERTIES OF CARBON FOAM

Preparation, microstructure, properties and foaming mechanism of a foamed ceramics with high closed porosity