Abstract:In this paper, first, the meso-debonding process of a GAP/CL20/AP composite solid propellant under uniaxial tension was analyzed using the advantages of the material point method (MPM) and the finite element method (FEM) for the first time; then, the numerical simulation results were compared with the experiments. Based on the basic principle of modeling with the material point method, grains of different sizes were generated quickly and efficiently. Next, the grains were dispersed into particles, and the position information of the particles was mapped onto the background grid, so the background grids were used to determine the position of the grains. After that, the generated AP and CL20 grains were imported into the commercial software Abaqus through python scripting codes for numerical calculation. Based on macro-mechanical tests and a micro-numerical simulation, this paper studies the micro-internal mechanism that affects the macro-mechanical properties of composite solid propellants. Three interface parameters needed to be determined by parameter inversion, and the value of the objective interpolation function minR was 0.05078%. From a comparison, it was found that the numerical simulation results are in good agreement with the experimental results in the aspects of micro-crack cracking characteristics and the nominal stress–strain curve of propellants. After that, the influence of interface parameters on the stress–strain curve are discussed. The research in this paper has high scientific value and engineering application value and can provide important reference and guidance for the design of composite solid propellants and its mechanical property analyses, so as to solve the structural integrity problem of solid rocket motor charges.

Numerical Simulation of Solid Propellant Mesoscopic Damage Using Surface-Based Cohesive Approach

Numerical Simulation on the Interface Debonding in Solid Propellant under Large Deformation by a Cohesive Zone Model

Multiscale Modeling of Heterogeneous Propellants from Particle Packing to Grain Failure Using a Surface-Based Cohesive Approach

Numerical simulation of crack propagation in solid propellant with extrinsic cohesive zone model

Numerical study of the influence of initial defects on the mechanical properties of composite solid propellants

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Modeling and Simulation of the Debonding Process of Composite Solid Propellants

Three Dimensional Numerical Simulation on Collision and Press Process of Propellant Bed

Numerical Simulation of Material Surface Damage by High Speed Liquid-Solid Impact

Numerical Simulation of Damaging Process in Mesosize for Brittle and Ductile Materials

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

The Mesoscopic Numerical Simulation of GAP/CL20/AP Composite Solid Propellant Based on MPM and FEM

Numerical simulation for the dynamic failure process in brittle materials

Numerical Simulation of Mesoscopic Tensile Fracture Process of Concrete Using the Cohesive Elements

Numerical Simulation of Particle Fracture and Surface Erosion Due to Single Particle Impact

Simulation of Cylindrical Shell Damage by Fragments and Shock Waves

Numerical Simulation for the Damage Effect of Air Target Subjected to Blast Wave

Meso-scale Failure Simulation of Polymer Bonded Explosive with Initial Defects by the Numerical Manifold Method

Numerical Simulation of Failure Process of Rock-Like Materials Subjected to Impact Loads

NEPE Propellant Mesoscopic Modeling and Damage Mechanism Study Based on Inversion Algorithm

Numerical Simulations of the Damage Evolution for Plastic-Bonded Explosives Subjected to Complex Stress States