Abstract:Combustion instabilities have been a plaguing challenge in lean-conditioned propulsion systems. An open-loop control system was developed using machine learning to suppress pressure fluctuations and NOx emissions simultaneously. The open-loop control is realized by regulating the solenoid valve to modulate the methane supply. Control laws comprising the multi-frequency forcing are generated via the linear genetic programming (LGP), before being converted into square waves with different frequencies and duty cycles to activate the solenoid valve. The cost function is intended to evaluate and rank individuals of each generation, so as to select candidates for evolution. Optimized periodic forcing (OPF) with different duty cycles (d) and frequencies (fP) is set to provide a comparison with the superiority of multi-frequency forcing of LGP. Three stages of pressure oscillations and NOx emissions have been found as d increases from 0.5 to 1.0: high level, transition, and low level, revealing the transition of the combustion mode. After ten generations of development, the pressure amplitude and NOx emissions are reduced by 67.1% and 36.9% under the optimal control law identified by LGP, respectively. The flame structure images and Rayleigh index maps indicate that the convective movement of the flame, which may be the key factor driving combustion instabilities, can be suppressed by the optimal control law. Furthermore, the proximity graph of the similarity between control laws is introduced to depict the machine learning process, with the steepest descent lines visualizing its ridgeline topology. With the evolution process, individuals are found moving closer to the top right-hand corner of the map, and two main search pathways gradually become clear.

Self-adaptive Control of Air-fuel Ratio for Lean Burn CNG Engine Based on GPC

Generalized Predictive Control For A Precise Crude Oil Blending Process

Rail pressure controller design of GDI basing on predictive functional control

Optimal control of oil-gas switch process of CNG/diesel dual fuel engine

Model-Based Control for Air-Fuel Ratio of Natural Gas Fueled SI Engines

Control and Experiment of the Start and Idle of Lean-Burn Natural Gas Engine

Adaptive and Learning Control for SI Engine Model With Uncertainties

Model-Based Precise Air-Fuel Ratio Control for Gaseous Fueled Engines

Controller Design and Emission Improvement for Lean-Burn CNG Engine Based on UEGO Controller

Model-Based Stochastic Adaptive Air-Fuel Ratio Control of Direct Injection Biogas-Fuelled Engines

Intelligent Air/fuel Ratio Control Strategy with a PI-like Fuzzy Knowledge–based Controller for Gasoline Direct Injection Engines

Model Prediction Control of Fuel-Air Ratio for Lean-Burn Spark Ignition Gasoline Engine

Experimental Study and Model Predictive Control of a Lean-Burn Gasoline Engine Coupled With a Passive Selective Catalytic Reduction System

Combustion timing control of HCCI engine based on NNPC and Elman‐NN model under complex conditions

Experimental Investigation and Control Strategy of CNG Engines Based on Neural Networks

Model predictive control for an IGCC gasifier

Study on Control-Oriented Emission Predictions of PPCI Diesel Engine with Two-Stage Fuel Injection

Modelling and predictive control of a new injection system for compressed natural gas engines

MODEL BASED AIR-FUEL RATIO CONTROL FOR PFI SI ENGINES FUELED WITH ETHANOL-GASOLINE BLENDS

Research on Reinforcement Learning Model Predictive Control for Diesel Engine VGT-EGR-TVA System

Simultaneous control of combustion instabilities and NOx emissions in a lean premixed flame using linear genetic programming