Abstract:Free-form grid shell structures are widely used for stadiums, airport terminals, exhibition pavilions, shopping malls and warehouses, however, the shape of the grid surface is usually complex. A flexible joint that can adapt to the curvature variation of the free-form surface is therefore important for assembling such structures. To meet the demand of various curvatures for single-layer free-form grid structures, a new type of prefabricated bolted joint is introduced in this paper. A series of in-plane bending tests were conducted to investigate the initial stiffness and the moment resistance of the joints. Coupon tests were carried out to study the material properties and provide parameters for a numerical study. FE models considering the geometric and material nonlinearity were developed and validated by the tests. Parametric studies were then carried out using the developed FE model to investigate the influencing geometric factors of the in-plane behaviours semi-rigid joints. The results demonstrated that the initial in-plane stiffness of the joints is dominantly controlled by the endplate thickness, the side plate thickness, the bolt diameter and the bolt row distance, while the moment resistance of the joint is governed by the endplate thickness, the side plate thickness, the sleeve cross-sections and the bolt row distance. Subsequently, FE analysis was carried out using the validated FE models to investigate the out-of-plane behaviour of the proposed assembled joint. The experimental and numerical study showed that the proposed joint has good rotational capacity and load-bearing resistance, therefore has the potential to be applied in the design and construction of free-form grid structures.

Pre-stressed Bumpy Ridge Joining Method for Mechanical Structures

Principle and Application of Pre-stressed Bumpy-ridge in Field of Heavy Mechanism

Experimental and Numerical Study on the Performance of New Prefabricated Connections for Free-Form Grid Structures

Fatigue Life Prediction of the Bumpy Ridge Joining of the Heavy Die Forging Press with Steel Wire Wound

Overview of Heavy Prestressed Bumpy Ridge Joining Structure with Steel Wire Wound

The Basic Principles of the Prestressed Bumpy-ridge Structure with Steel Wire Wound

Connection Form of Bearing Structure for Heavy Hydraulic Equipment

Study on Influence of Some Factors on Bumpy-ridge Structure Applied to Heavy Equipment

Forming and layering method optimization of prestressed joint of composite-metal drive shaft

Integrity Analysis of Bumpy-ridge Beam in the Pre-stressed Wire Winded Framework

Pillar and Arched Girder Totally Bumpy Ridge Joining Frame with Steel Wire Wound

Comparative Investigation of Auxiliary Processes for Increasing the Strength of Clinched Joints

Double-layer sheets SPR-bonded hybrid joining method of an extendable die

Research on the Deformation Behaviors of the Clinch Joining of Aluminum Alloy and Quiet Steel Sheets

Analysis of Mechanical Properties of Joint Structure in External Pre-Stressing Concrete Bridges

Experimental and numerical research on mechanical behavior of prestressed high-strength bolt joint

Forming Mechanism of the Repairing Process on Clinched Joint

Experimental Research on the Compressed Joints with Different Geometrical Parameters

Friction rivet joining towards high-performance wood -metal hybrid structures

Experimental analysis of ridge joint of steel C back-to-back with plate

Flexure Behavior of Prestressed RC Modula for Onshore Wind Tower Foundation