Abstract:Background Because the nonunion rate of conservative treatment was up to 1 5%, midshaft clavicle fractures with wedge-shaped fragments had been mainly treated with operation in recent years.Plate fixation was still one of the mainstream internal fixation methods,although a few scholars advocated various intramedullary fixations.For conventional plate and screw fixation techniques,one of the principles was to fix the free wedge-shaped fragments with lag screws as far as possible.We had ever improved the conventional techniques by intramedullary K-wire assistance in reduction,binding fragments with suture,and bridging plate fixation,which obtained good effects. But we found that the open reduction and bridging plate fixation increased the operation trauma because of the long incisions.We had made further improvement on this basis.From April 2011 to April 2014,26 patients of midshaft clavicular fracture with wedge-shaped fragments were treated by close reduction and MIPPO (minimal invasive percutaneous plate osteosynthesis)technique with three incisions.We performed this retrospective study to explore the operation methods and treatment effects of the midshaft clavicular fractures with wedge-shaped fragments using MIPPO technique.A group of 29 patients treated by conventional open reduction and internal fixation techniques,from March 2007 to November 2011,were also performed study as control group with complete follow-up data.Methods (1 )General information:All the cases were selected from the patients who were treated in our department from March 2007 to April 2014.Among them,26 patients were treated with three-incision MIPPO bridging technique,and 29 patients were treated with conventional open <br> reduction,lag screw fixation for fragments and neutralization or compression plate fixation.The mechanisms of injury were mainly fall damage.The two groups respectively had 2 cases of falling injury from height and 1 case with multiple fractures.According to Robinson classification,the fracture types were classified as follows:II B1 type was defined as the midshaft clavicular fracture with displacement and 1 wedged-shape fragment in the fracture site;IIB2 type was defined as the fracture with 2 or more free fragments in the facture site.The gender,age,dominant side,time from injury to operation and fracture type can be seen in table 1.(2)Operation methods:MIPPO group:Patients were on beach chair position under general anesthesia which had good muscular relaxation. The posterolateral side of the affected shoulder,upper arm and forearm were disinfected to guarantee that the surgeon can adequately move the shoulder during operation.The upward tilt tip of the proximal clavicular main fragment was obviously be palpated.A 2 cm incision was applied to expose the tip of the proximal fragments without periosteal dissection.A double-tip intramedullary K-wire with a diameter of 2 mm or 2.5 mm was inserted retrogradely into the medullary cavity of the proximal main fragment till the end of the K-wire was at the same level to the tip of the proximal fragment.The proximal tip of the K-wire pierced out of the skin in front of the proximal clavicle.The affected upper arm of the patient was elevated upward and tracted laterally by an assistant doctor in a way similar to the manipulative reduction to reduce the main fragment.At this point the operator could feel that the posterosuperior cortexes of both the distal and proximal main fragments were connected with palpation. Once the posterosuperior clavicular cortexes were matched, the intramedullary K-wire was inserted into the distal medullary cavity from the proximal medullary cavity till it pierced out of the clavicular posterior edge and was located at the posterior corner of acromion. Intraoperative fluoroscopy was conducted to confirm the reduction of the free fragments and the connection of the main fragments.The 10-hole anatomical locking plate (GE medical,US)was inserted percutaneously along the surface of the clavicle towards the proximal end through the middle incision.The proximal end of the plate was touched from the surface of the skin.A 2 cm incision was made on top of that to expose the proximal end of the plate.The plate was completely inserted to the proximal end till its distal end was located at the incision above the fracture site.Then the plate was moved towards the distal side along the surface of the clavicle until the fracture site was located right in the middle of the plate.The plate was touched at the distal end and then exposed with a 2 cm incision.After the plate was confirmed to be placed at the appropriate position,one locking screw was respectively driven in at both ends.Then other locking screws were inserted from lateral to middle at each of the distal and proximal ends.If the screw was obstructed,then the K-wire was pulled out gradually and the remaining screws were driven in.Three bicortical screws were inserted at each of the distal and proximal ends for fixation.The position of internal fixation was confirmed satisfactory under fluoroscopy.The incision was closed without the drainage tube.Conventional ORIF group:Cervical plexus block combined with brachial plexus block or general anesthesia was applied.The patient position was the same as that of the MIPPO group.The incision of clavicle surface was adopted to first expose the fracture site.The lag screw fixation was used between the larger free fragments and the main fragments to convert the clavicular shaft fracture with free fragments into simple fracture and then reduce it using Kocher clamp.The straight plate with 7-9 holes was fixed on the surface of clavicle after reduction and 3 screws were inserted respectively on each side.(3)Post-operative rehabilitation and follow-ups:The passive activities of the shoulder joint,mainly including external rotation and abduction,were initiated at the second day after surgery.The abduction angle is not more than 90°.Three sets of exercises respectively distributed in the morning,afternoon and evening were carried out every day with 10 times in each set while the affected limb was put in a sling for protection during the rest of the time.After 4 weeks,the sling was removed and the shoulder was allowed for simple daily life use, but the affected limb was limited to lift heavy obj ects and hyperabduct.1 2 weeks later,the affected limb was restored for complete work.The fracture healing of heavy manual workers should be confirmed by fluoroscopy. The X-ray examinations were <br> performed in the 4th,8th,12th,and 16th week.During follow-ups Constant Score System was applied to assess their shoulder functions and the complications were recorded.(4 ) Statistical methods:SPSS 19.0 software was used.The measurement data were indicated as means ± standard deviations.χ2 test and Fisher′s exact probability were performed in the comparison of the measurement data between two groups.If the measurement data of the two groups met the normal distribution,then the Independent-Sample t test was used for the comparison;otherwise, the Wilcoxon rank sum test was adopted;a p value less than 0.05 was considered as significant difference. Results After an average of 1 5 months (6~3 1 months)follow-ups,all the fractures in the MIPPO group obtained bony union.One case of nonunion occurred in the conventional ORIF group with plate breakage and loss of reduction.The patient underwent reoperation.The two groups had no significant difference in the failure rate.The operation time of the MIPPO group was 73.5 minutes in average with the mean intraoperative blood loss of 3 1 .9 ml.The MIPPO group was obviously better than the conventional ORIF group in the respects of operation time and blood loss.The time of fracture healing was 13.7 weeks in average and had no significant difference when compared to the conventional ORIF group.The Constant scores had no significant difference between two the groups either. Some patients in the two groups accepted second operation to remove implants although there was no complication.Two lean patients of the MIPPO group had obvious skin uplift and strongly urged the second surgeries of implants removal.Conclusions This study suggested that for the midshaft clavicle fractures with free wedged-shape fragments,the satisfactory functional reduction of free fragments can be obtained completely through close reduction.Compared to the conventional rigid internal fixation technique with lag screws for wedge-shaped fragments,it is unnecessary to pursuit anatomical reduction.MIPPO technique has the advantages of simple operation,small trauma and satisfactory treatment effects,reduces the operation time and increases the healing rate.

A Minimally Invasive Surgery for Clavicle Fracture Using Kerschner Wires and Absorbable Suture

Using Suture and Locking Anatomical Bridging Plate to Fix Comminuted Mid-Shaft Clavicle Fractures with Intramedullary Nail Assistance in Reduction.

[Effectiveness of minimally invasive internal fixation with locking plates for mid-shaft clavicle fractures]

[Treatment of Comminuted Clavicle Shaft Fractures with Provisional Intra-Medullary K-wire Fixation and Bridging Plate Internal Fixation].

Minimally Invasive Plate Osteosynthesis for Midshaft Clavicular Fractures Using Superior Anatomic Plating

Clinical Study on The Effect of Minimal Invasive Percutanous Clavicular-hook-plating on Acute Acromioclavicular Dislocation

A novel surgical method for treating fractures of the middle third of the clavicle

[A Comparative Study on Operation and Non-Operation in Treating Fractures of Scapular Neck].

Kirschner wire intramedullary fixation combined with improved nice knot-end cerclage temporarily fixation-assisted reduction before plate osteosynthesis in treating displaced and comminuted clavicle fractures

Reconstruction of Coracoclavicular Ligament Combined with Hook Plate Technique for Treatment of Distal Clavicle Fractures Involving Avulsion of Coracoclavicular Ligament

Operative Treatment of Complex Fractures of Midshaft Clavicle Using a Locking Plate: a Comparison Be-Tween Mini-Invasive Plate Osteosynthesis ( MIPO ) and Conventional Open Reduction

A novel surgical method for treating medial-end clavicle fractures

Analyses and countermeasures of complications in patients with clavicle fractures

Clinical Analysis of Therapeutic Effect of Kirschner Wire below Minor Incision on Femoral Neck Fracture

Minimally Invasive Plate Osteosynthesis with Mini-Open Technique and Supraclavicular Nerve Preservation Reduces Postoperative Numbness in Acute Displaced Midshaft Clavicle Fracture

Comparison of Minimally Invasive Fixation of Mid-Shaft Clavicular Fractures with Threaded Elastic Intramedullary Nail (TEIN) and Elastic Locking Intramedullary Nail (ELIN)

Curative Effect Evaluation of Clavicular Hook Plate and Kirschner Wire Fixation in the Treatment of Acromioclavicular Joint Dislocation

Treatment of Displaced Clavicular Shaft Fracture: a Comparison Between Locking and Nonlocking Reconstruction Plating

Applying MIPPO technique to treat clavicle shaft fractures with wedge fracture fragment

[Clinical effects of Kirschner wire with hole transverse fixation combined with titanium cable purse string suture for the treatment of refractory fracture of patellar comminuted fracture]

Treatment of unstable distal clavicle fractures (Neer type II): A comparison of three internal fixation methods.