Abstract:To reveal the deformation mechanism during tunneling in deep soft ground, triaxial unloading confining pressure tests and triaxial unloading creep tests were carried out on sandy mudstone specimens to study the dilatancy and fracturing behavior of soft rock. In the triaxial unloading confining pressure tests, the stress path and different unloading rates were considered to reflect the unloading characteristics of the excavation methods. The unloading rate effects and the rock damage evolution law are studied. The following conclusions are obtained from the results. Firstly, when the unloading rate is smooth, the peak strengths and deviatoric stress–strain curves under the unloading condition are close to those under the conventional loading condition. Secondly, the post-peak brittle characteristics are more apparent with the increasing unloading rates. Thirdly, the soft rock undergoes five deformation and failure regimes of elasticity, pre-peak unloading damage–dilatancy, post-peak brittle drop, linear strain softening and residual perfect plasticity under quasi-static smooth unloading of mechanized excavation which is mainly focused on in this study. Fourthly, the damage evolution law at the pre-peak damage–dilatancy stage follows an exponential function. Fifthly, during the post-peak stages, multistage microfractures are initiated, propagated and finally coalesced forming a shear-fragmentation band with a certain thickness, accompanied by significant volumetric dilatancy. In the triaxial unloading creep tests, multistep unloading of the confining pressure was applied, while the axial pressure was kept constant. The results show that when the deviatoric stress is larger and the experienced creep time is longer, the unloading effect and creep characteristics become more apparent accompanied with obvious lateral dilatancy, eventually leading to significant creep–dilatancy. The progressive failure with time is caused by the damage accumulating with time-dependent crack expansion, which can be called as ‘time-dependent damage and fracturing’. The reasons for the above evolution process are presented, then the deformation mechanism of soft rock is revealed. The soft rock deformation mainly consists of two parts. One part is the pre-peak damage–dilatancy and post-peak fracture–bulking produced at the excavation unloading instant. The other part is creep–dilatancy caused by time-dependent damage and fracturing in a period of time after excavation. The above-mentioned results of damage, dilatancy and fractures evolution process are in good agreement with the in situ monitoring results and previous studies about the surrounding rock convergence, fracturing and EDZ (excavation damaged zone) development.

TEST STUDY ON DEFORMATION FIELD EVOLUTION OF ROCK MATERIAL UNDER CYCLIC LOAD

A review of experimental and theoretical research on the deformation and failure behavior of rocks subjected to cyclic loading

Experimental Investigation of Damage Evolution and Failure Criterion on Hollow Cylindrical Rock Samples with Different Bore Diameters

Strength and damage evolution mechanism of rock mass with holes under cyclic loading

Stress–Energy Mechanism for Rock Failure Evolution Based on Damage Mechanics in Hard Rock

Numerical and Experimental Study of Deformation and Failure Behavior in a Double Rock Specimen System

Experimental Study of Energy Evolution at a Discontinuity in Rock under Cyclic Loading and Unloading

Experimental Study on Rock Strength and Deformation Characteristics Under Triaxial Cyclic Loading and Unloading Conditions

Experimental study of the damage characteristics of rocks containing non-penetrating cracks under cyclic loading

Energy Evolution and Damage Characteristics of Rock Materials under Different Cyclic Loading and Unloading Paths

Deformation Behaviour and Damage Evolution of Carbonaceous Phyllite under Cyclic Triaxial Loading

Evolution of Deformation Failure and Energy of Siltite and Significant Shear Fracture Structure Under Cyclic Loading

Experimental mechanical strength and deformation characteristics of deep damaged–fractured rock

Numerical simulation of micro crack evolution and failure modes of limestone under uniaxial multi-level cyclic loading

Experimental study on three-point-bending characteristics of hard and soft rock-like materials under different loading rates

Experimental Study on the Dilatancy and Fracturing Behavior of Soft Rock Under Unloading Conditions

Study on Progressive Damage and Failure of Sandstone Samples subjected to Cyclic Disturbance Loads using a Modified Triaxial Test System

Study on damage anisotropy and energy evolution mechanism of jointed rock mass based on energy dissipation theory

Acoustic Emission Characteristics and Energy Evolution of Red Sandstone Samples under Cyclic Loading and Unloading

Analysis of Failure Mechanics and Energy Evolution of Sandstone Under Uniaxial Loading Based on DIC Technology

Study on the evolution law and quantitative characterization of micro-crack propagation in the compressive failure process of rocks