Abstract:Gigabit and multigigabit transceivers require very long adaptive filters for echo and near-end crosstalk (NEXT) cancellation. Implementation of these filters not only occupies large silicon area but also consumes significant power. These problems become even worse when the Tomlinson-Harashima precoding (THP) technique is used in applications such as 10-Gigabit Ethernet over Copper (10GBASE-T) as the input to the echo and NEXT cancellers is no longer a simple PAM-M signal. To reduce the complexity of these cancellers, in this paper, a novel method based on word-lenth reduction technique is proposed. The proposed design is derived by replacing the original input to the echo and NEXT cancellers with a finite-level signal, which is the sum of the input to the TH precoder and a finite-level compensation signal. Then, this modified input signal is recoded to have shorter word-length compared with the original input. Hence, the overall complexity can be reduced by using the proposed method. To further reduce the complexity of these cancellers, an improved design is proposed by exploiting the property of the compensation signal. Compared with the traditional design, the proposed echo and NEXT cancellers have exact input and do not suffer from the quantization problem, and thus the), are more suitable for VLSI implementation. The proposed method can also be applied to design adaptive echo and NEXT cancellers with little modification. The performance evaluation is performed by simulations to verify the proposed design. It is shown that, by applying the proposed method to a 10GBASE-T ethernet system, the hardware complexity of echo and NEXT cancellers can be reduced by about 10.82% without performance loss, compared with the traditional design.

Pre-equalizer for 1000baset Ethernet Transceiver

A Gain Control Baseline Circuit of the Analog Front-End Circuit for the 1000Base-T Ethernet Transceiver

Equalizer for 10Base-T/100base-tx Ethernet Transceiver Based on DSP Structure

A 0.7-8 GHz High IF Frequency-Extended Transmitter Front-End with −47.1-Db EVM at 16 QAM in 65-Nm CMOS

A 10Gb/s analog equalizer in 0.18um CMOS

A 1.8 V Analog Front-End for Gigabit Ethernet Receiver

106.25 Gbaud On-Off Keying and Pulse Amplitude Modulation Links Supporting Next Generation Ethernet on Single Lambda

A High Efficient CTLE for 12.5 Gbps Receiver of JESD204B Standard

Design of Equalizer in 2.5 Gbps Transceiver System

A 25gb/s Adaptive Decision Feedback Equalizer for 100G Ethernet in 65NM CMOS Technology

1.25 Gbit/s CMOS common-gate preamplifier for optical receiver

Co-design of 40Gb/s equalizers for wireline transceiver in 65nm CMOS technology

A Highly-Scalable Analog Equalizer Using a Tunable and Current-Reusable for 10-Gb/s I/O Links

MIMO Equalization and Cancellation for 10Gbase-T>sup<1>/sup<

A 1.8 V Low-jitter Clock Generator for 1000 Base-T Ethernet Transceiver

A Gb/s VLC Transmission Using Hardware Preequalization Circuit

A 3.75gbps Configurable Continuous Time Linear Equalizer and 3-Tap Decision Feedback Equalizer in 65nm Cmos

3 V low-jitter frequency synthesizer for a fast ethernet transceiver

Low-Complexity Echo and NEXT Cancellers for High-Speed Ethernet Transceivers

Pre-Equalization and Bandwidth Limitation for a 100-G-Baud 32 QAM All-Silicon Transmitter

A 3.3v Low-Jitter Frequency Synthesizer Applied to Fast Ethernet Transceiver