Discussion on revamping imported units by advanced chemical engineering technology

费维扬,吕智文

DOI: https://doi.org/10.3321/j.issn:0253-4320.2001.09.009

2001-01-01

Abstract:The recent advances in chemical engineering technology and process intensification are introduced. The importance, approaches and advantages of revamping imported units by advanced technology are discussed. A case study on aromatic separation by sulfolane is presented.

What problem does this paper attempt to address?

Toward Process System Engineering from Chemical Reaction Engineering--The Road of PTA Process Development

Xi Li

DOI: https://doi.org/10.3969/j.issn.1001-7631.2005.05.001

2005-01-01

Abstract:A review of p-terephthalic acid (PTA) process development carried out in Zhejiang University during recent years was made. The R & D works cover oxidation and crystallization kinetics, gas-liquid mass transfer, reactor modeling, database development, novel reactor design, process modeling, simulation and optimization. A viewpoint was emphasized through this case study, which chemical reaction engineering should be developed to process system engineering to extend its scope, and particular attention should be paid on reactor and process unit modeling.
Problems in Propylene Rectification System and the Optimization of Revamping Plan

姜涛,宋虎林,邸书才

DOI: https://doi.org/10.3969/j.issn.1671-7120.2008.02.010

2008-01-01

Abstract:This paper discusses the process flow of propylene rectification system in the ethylene plant at Zhongyuan Petrochemical Co., Ltd., the existing problems and the corresponding technical measures. By demonstrating eight revamping plans, plan No. 8 is believed to be applicable for the revamping of propylene rectification system in the ethylene plant at Zhongyuan Petrochemical Co., Ltd..
Green Chemical Engineering in China

Xiangping Zhang,Changjun Liu,Qilong Ren,Xueqing Qiu,Baohua Xu,Xintong Zhou,Yuanbang Xie,Hongming Lou,Mohammad Chand Ali,Hongshuai Gao,Yinge Bai,Suojiang Zhang

DOI: https://doi.org/10.1515/revce-2017-0038

2019-01-01

Reviews in Chemical Engineering

Abstract:In China, the rapid development greatly greatly promotes the national economic power and living standard but also inevitably brings a series of environmental problems. In order to resolve these problems fundamentally, Chinese scientists have been undertaking research in the area of green chemical engineering (GCE) for many years and achieved great progresses. In this paper, we reviewed the research progresses related to GCE in China and screened four typical topics related to the Chinese and screened four typical topics related to the Chinese resources characteristics and environmental requirements, i.e. ionic liquids and their applications, biomass utilization and bio-based materials/products, green solvent-mediated extraction technologies, and cold plas-mas for coal conversion. Afterwards, the perspectives and development tendencies of GCE were proposed, and the challenges which will be faced while developing available industrial technologies in China were mentioned.
Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Wenkai CHENG,Jiajun WANG,Xueping GU,Lianfang FENG

DOI: https://doi.org/10.16085/j.issn.1000-6613.2016.05.003

2016-01-01

Abstract:The progress on new types of agitated apparatus for polymer devolatilization was reviewed, while the key issues on the development of new devolatilization devices were analyzed. The characteristics of flow field,mixing,film forming and surface renewal are the key factors to strengthen the mass transfer process. Developing highly efficient and self-cleaning devices for polymer devolatilization is the major prospect in this field. The applications of computational fluid mechanics (CFD) simulations on transfer process in such devices were also discussed. Finite element method combined with mesh superposition technique(MST) and finite volume method combined with dynamic mesh technique have been used to deal with problems such as complex geometric blades and fins,twin-shaft rotating motion,tiny gaps within engaged areas and so on. Gas-liquid interface can be precisely tracked by means of volume of fluid(VOF) multiphase flow model. The film forming and surface renewal characteristics can be investigated,which contributes to learn more about the mass transfer mechanism. CFD numerical simulation offers a new idea for designing highly efficient devices for polymer devolatilization.
ADOPTING ADVANCED AND APPLICABLE TECHNOLOGY TO PROMOTE TECHNICAL PROGRESS OF ATMOSPHERIC AND VACUUM DISTILLATION UNIT

邢颖春,冯霄

DOI: https://doi.org/10.3969/j.issn.1002-106X.2003.04.001

2003-01-01

Abstract:The technology of Chinese atmospheric and vacuum distillation unit was compared with that of the foreign advanced unit. Advanced and applicable technologies were adopted to promote technical progress of domestic atmospheric and vacuum distillation unit, including use of large-scale unit, prolonging its running period, energy conservation, increasing distillation yield, producing more diesel, using advanced management and control, etc. In addition, developing integrated refinery design and oil-product demetallization agents have been proposed.
The Progress of Process Intensification

费维扬

DOI: https://doi.org/10.3969/j.issn.1006-6055.2004.05.001

2004-01-01

Abstract:The history and recent advances of process intensification are introduced.And the characteristics of process intensification are analyzed.In this paper,it is discussed in detail by instance that involves the function and some problems of chemical engineering process intensification.
Discussion on Improving Regeneration System of Fluid Catalytic Cracking Unit

ZHANG Li-ping

DOI: https://doi.org/10.3969/j.issn.1671-0460.2009.01.009

2009-01-01

Abstract:Some problems in regeneration system of Fluid catalytic cracking unit were discussed in this paper.In-fluence factors on catalyst regeneration were analyzed.Several solutions were put forward.
Research advances on process systems integration and process safety in China

Siyu Yang,Xiao Feng,Linlin Liu,Zhanpeng Zhang,Chun Deng,Jian Du,Jinsong Zhao,Yu Qian

DOI: https://doi.org/10.1515/revce-2017-0046

2020-01-01

Reviews in Chemical Engineering

Abstract:Process systems engineering research focuses on the planning, design, operation, and safety of process systems rather than unit operations. In response to the rapid growth of the chemical process industry in the last 20 years in China, advanced system integration and process safety technologies are investigated and applied for better resource utilization, less environmental impact, and safer working places. In this regard, the review in this article consists of four main achievements: (1) process synthesis, (2) energy system integration, (3) water system integration, and (4) process safety management. The purpose of process synthesis and integration is to improve resource and energy utilization, at the same time lowering by-products and emissions. Optimization is conducted on process structure and operation, following the principles of resource coupling and energy cascade utilization. Typical examples are coupling of coal and hydrogen-rich resources and integration of coal-based polygeneration process of chemicals, electricity, and heat. Energy integration implements the coordinated optimization of total site energy systems. Reviews are made on specific methodologies based on the thermodynamics and applications of design and retrofit in ethylene, oil refining, and synthetic ammonia industries. There are energy savings by 10%-20% and yields increasing by 20%-30%. In addition, waste heat recovery and cold energy utilization are also important research areas. Reviews on the progress of water system integration and its industrial applications are also conducted. It includes the direct reuse, regeneration, and reuse/recycle in water systems and systems with internal water mains. Finally, safety management and technologies are also indispensable technological advancements of the process. The legislation system and the work safety-related standard system have been gradually established and enforced. Process safety research progress is reviewed, and questions are proposed for improving the accident prevention and safety management agenda.
Advances in Research of Micro-Reactors

骆广生,王凯,吕阳成,徐建鸿,邵华伟

DOI: https://doi.org/10.3321/j.issn:0253-4320.2009.05.007

2009-01-01

Abstract:The micro chemical engineering system is an important technology to make the chemical engineering process green,safe and highly efficient.During recent years many kinds of microreactors have been designed and the transport performance of fluid at a microscale has been widely investigated.Furthermore,the microreactor has been widely used in the research and industrial process.This paper introduces the research and development of microreactor used for the liquid phase reaction,and the lastest progress in this area is pointed out.
Application of Process Intensification For Energysaving in Chemical Industry

FANG Xiang-chen,LI Yuan-sheng,LIU Quan-jie

DOI: https://doi.org/10.3969/j.issn.1671-0460.2008.01.001

2008-01-01

Abstract:Novel technologies for intensifying chemical engineering processes that are developed by Fushun Research Institute of Petroleum and Petrochemicals of Sinopec are reviewed.The technologies include impinging stream reactors used in transesterification for making bio-diesel,light distillate oxidation for desulfur or sweetening;high"g" technology used in waste gas treating in refinery;ultrasonic technology used in separating ethanol from lignocellulose conversion process;catalytic distillation technology used in maleic anhydride esterification process,coupling aromatization and separation process used in making paraxylene.
Some aspects of fundamental studies in advanced manufacturing technology of process industries

涂善东,喻九阳

DOI: https://doi.org/10.3969/j.issn.1674-2869.2002.01.011

2002-01-01

Abstract:The present paper summarizes the fundamental studies relevant to the development, operation and remanufacture of advanced processing plants, which include computational molecular dynamics, computational fluid dynamics, fluidsolid interaction, high temperature materials and structures, and structural integrity principle of pressurized components. The future development is also discussed.
Review of recent development of green chemical technologies

Heqin YANG,Zhicheng LIU,Zaiku XIE

DOI: https://doi.org/10.16085/j.issn.1000-6613.2016.06.001

2016-01-01

Abstract:At present,China’s chemical industry is facing big challenges of resources and environment,while green chemical technologies could provide ways to promote the sustainable development of China’s chemical industry. This article proposed that the degree of green chemical technologies can be measured by atomic economy,energy consumption and low carbon of full life cycle. Then,it summarizes three basic ways to realize green chemistry,including low carbonization, clean processes and energy conservation. Moreover,this article reviews the development and application of green chemical technologies in China,involving in the chemical transformation of renewable biomass resources,green chemical process,high efficient reactor or separation equipment, green solvents,homogeneous catalysis used at low reaction temperature,green hydrogen production and utilization of carbon dioxide,etc. Finally,outlook is given,and it is suggested that the green carbon science concept should always be committed,and special attentions could be paid on direct conversion technologies,energy management in the input and intermediate process,and output CO2 intensive transformation,etc.
Advances in Research of Microstructured Chemical Process

LUO GuangSheng,WANG Kai,XU JianHong,WANG YuJun,L(U) YangCheng

DOI: https://doi.org/10.1360/n032014-00158

2014-01-01

Scientia Sinica Chimica

Abstract:The research of microstructured chemical process is one of the high promising directions in chemical engineering field, because the new process may lead chemical industry to be more safety, friendly and efficient. In recent years, the key points in microstructured chemical process research mainly include multi-phase microflow, flow pattern control, micromixing, multi-phase reaction at micrometer scale, and so on. This paper reviews the latest progress and development of the research. The characterizations and advantages of microstructured chemical process are summarized and the future development directions are suggested.
Analysis with fields/fluids and separation process intensification

Youyuan DAI,Jin ZHANG

DOI: https://doi.org/10.3969/j.issn.1007-8924.2011.03.008

2011-01-01

Abstract:Process intensification is one of the research hotspots in chemical engineering and technology.With the recent advances of chemical engineering and technology great progress of the coupling technology and process intensification has been made.This paper introduced fundamental concepts on the analysis with fields and fluids.Starting from the analysis,process coupling technology and separation process intensification based on chemical interactions and external fields have been discussed.
Advances Treatment Technologies in Chemical Industry Wastewater

Xie Mengyi,Yu Tao,Meng Zhang

DOI: https://doi.org/10.62022/ercc.issn3006-0095.2024.01.006

2024-01-01

Abstract:The main treatment methods of chemical wastewater were reviewed. Physical, chemical, and biochemical treatment technologies effective for removing those pollutants were presented with their applicability, effectiveness and advantages. The problems facing the wastewater treatment in the petroleum chemical industry and coal chemical industry were introduced. In the end, the new progress and trend of the processes were overviewed.
Research Progress in Biodesulfurization Technology for Diesel Oil

荆国华,李伟,施耀,谭天恩

DOI: https://doi.org/10.3969/j.issn.1005-9954.2003.06.014

2003-01-01

Chemical engineering

Abstract:The new progress in diesel oil biodesulfurization,including bioreaction mechanisms, bioreactor, separation technology, especially biocatalysts was introduced. The commercialization of biodesulfurization was analyzed and the application potential of biotechnology in petroleum refining industry was also proposed.
The Application of Green Energy-saving Technology in Petrochemical Engineering

Dong-ming LI

2017-01-01

Abstract:With the gradual naturity of petroleum technology,the utilization of petroleum has become more extensive.However,as well as the convenience which the petroleum brings,it also pollutes the environment seriously.In recent years,a series of energy conservation and emission reduction policy have been promulgated by the state,the environmental protection and conservation of resources have attracted more and more attentions,and therefore the introduction of green energy saving technology into the petrochemical industry is imperative.The necessity of green technology and the application of green and energy-saving technology in petrochemical engineering are introduced and analyzed.
Applications and Advances in Computer for Chemical Engineering

杨榛,浦伟光,隋志军,魏永明

DOI: https://doi.org/10.3969/j.issn.1001-4160.2010.02.002

2009-01-01

Chemistry World

Abstract:At present,computer application technologies are increasingly penetrated into all aspects of chemical engineering and will lead to comprehensive changes and advances in chemical engineering.The main applications and advances in chemical engineering design,chemical engineering production,scientific research,teaching and learning are introduced. Finally,future development trends of computer applications in chemical engineering are discussed.
Design and applied advanced process control systems to molecular sieve dewaxing unit

Zhang Weiyong,Shi Jian,Wang Jingchun,Huang Dexian

DOI: https://doi.org/10.3969/j.issn.1001-4160.2006.05.010

2006-01-01

Abstract:By using advanced process control technology,the performance of the control system can be improved,energy consuming can be reduced,and throughput of the more expensive product can be maxmized by controlling product closer to its specification.All these features can be achieved without significantly changing the process equipment.Multivarible predictive control is the most success- ful advanced process control technology in industry.This paper shows how the advanced process control is implemented in the molecu- lar sieve dewaxing unit of No.3 Plant of Fushun Petrochemical Company.From this application it demostrates that the advanced process control has its effectivity and usability in industry.
Survey on Modeling,Control and Optimization Techniques for Ethylene Process

杨尔辅,胡益锋,周强,徐用懋

DOI: https://doi.org/10.3969/j.issn.1007-7324.2002.02.001

2002-01-01

Abstract:From the state of the art development of ethylene process in China,a survey on modeling,control and optimization techniques for ethylene process as well as their applications domestic and abroad is presented. In addition,the trends and prospective futures of modeling,control and optimization techniques for ethylene process are also discussed.

Discussion on revamping imported units by advanced chemical engineering technology

Toward Process System Engineering from Chemical Reaction Engineering--The Road of PTA Process Development

Problems in Propylene Rectification System and the Optimization of Revamping Plan

Green Chemical Engineering in China

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

ADOPTING ADVANCED AND APPLICABLE TECHNOLOGY TO PROMOTE TECHNICAL PROGRESS OF ATMOSPHERIC AND VACUUM DISTILLATION UNIT

The Progress of Process Intensification

Discussion on Improving Regeneration System of Fluid Catalytic Cracking Unit

Research advances on process systems integration and process safety in China

Advances in Research of Micro-Reactors

Application of Process Intensification For Energysaving in Chemical Industry

Some aspects of fundamental studies in advanced manufacturing technology of process industries

Review of recent development of green chemical technologies

Advances in Research of Microstructured Chemical Process

Analysis with fields/fluids and separation process intensification

Advances Treatment Technologies in Chemical Industry Wastewater

Research Progress in Biodesulfurization Technology for Diesel Oil

The Application of Green Energy-saving Technology in Petrochemical Engineering

Applications and Advances in Computer for Chemical Engineering

Design and applied advanced process control systems to molecular sieve dewaxing unit

Survey on Modeling,Control and Optimization Techniques for Ethylene Process