Modeling of Propane Dehydrogenation Combined with Chemical Looping Combustion of Hydrogen in a Fixed Bed Reactor
Junru Liu,Rui Hu,Xinlei Liu,Qunfeng Zhang,Guanghua Ye,Zhijun Sui,Xinggui Zhou
DOI: https://doi.org/10.1016/j.cjche.2021.07.032
IF: 3.8
2022-01-01
Chinese Journal of Chemical Engineering
Abstract:A redox process combining propane dehydrogenation(PDH) with selective hydrogen combustion(SHC) is proposed, modeled, simulated, and optimized. In this process, PDH and SHC catalysts are physically mixed in a fixed-bed reactor, so that the two reactions proceed simultaneously. The redox process can be up to 177.0% higher in propylene yield than the conventional process where only PDH catalysts are packed in the reactor. The reason is twofold: firstly, SHC reaction consumes hydrogen and then shifts PDH reaction equilibrium towards propylene; secondly, SHC reaction provides much heat to drive the highly endothermic PDH reaction. Considering propylene yield, operating time, and other factors, the preferable operating conditions for the redox process are a feed temperature of 973 K, a feed pressure of 0.1 MPa, and a mole ratio of H 2 to C 3 H 8 of 0.15, and the optimal mass fraction of PDH catalyst is0.5. This work should provide some useful guidance for the development of redox processes for propane dehydrogenation.