Abstract:The excellent shape memory properties of NiTiFe alloys make them a popular choice for tube connection components and actuators in the aerospace industry. However, in order to obtain these properties, the alloy must undergo pre-deformation at specific cryogenic temperatures to induce the martensitic phase transformation. Despite their widespread use, the deformation behavior and shape memory mechanism of NiTiFe alloys at cryogenic temperatures remain unclear. To address this, we conducted a study investigating the deformation behavior and shape memory mechanism of Ni 47 Ti 50 Fe 3 alloy at temperatures ranging from −190 °C to 150 °C using tensile tests, free recovery tests, and EBSD analysis. Our findings suggest that the deformation behavior of NiTiFe alloy can be classified into four classes corresponding to different deformation mechanisms. At temperatures above the M d (−15 to −30 °C), dislocation slip and {114} B2 deformation twinning occur without reversible strain. However, reversible and irreversible strains occur simultaneously at temperatures between −50 to −90 °C. At temperatures ranging from −110 to −150 °C, the reorientation/detwinning of the R-phase, stress-induced martensitic phase transformation, and yield stage of martensite occur in sequence. When the deformation temperature is within the range of −165–190 °C, the reorientation/detwinning of martensite occurs during the stress platform stage, and irreversible strain occurs during the yield stage of martensite. The best shape memory effect of the NiTiFe alloy is observed at deformation temperatures near M f (−180 °C). Moreover, the reverse phase transformation temperatures increase with the increasing deformation amounts, even without plastic deformation. The temperature-dependent deformation map of NiTiFe alloy was obtained based on the tests conducted in this study, from which the influence of deformation temperatures on the different critical stresses and the deformation mechanism under different temperature conditions can be determined.

Phase Transformation Characteristics and Mechanical Properties of NiTiPd Shape Memory Alloy Thin Films

MECHANICAL PROPERTIES OF NiTi SHAPE MEMORY THIN FILMS

Preparation and Annealing of Sputtered NiTi Shape Memory Thin Films

Microstructure and Phase Transformation Temperature of NiTiNb Shape Memory Alloy Prepared by Laser Solid Forming Using Mixed Powder

An in Situ TEM Study of the Size Effect on the Thermally Induced Martensitic Transformation in Nanoscale NiTi Shape Memory Alloy

Effect of heat treatment on microstructure and functional properties of additively manufactured NiTi shape memory alloys

Effect of Ni content on the transformation behavior and mechanical property of NiTi shape memory alloys fabricated by laser powder bed fusion

Fabrication of nickel-titanium-iron shape memory alloys by powder metallurgy route and analyses of their physical and mechanical behaviour

Effect of solution treatment on the microstructure, phase transformation behaviour and functional properties of NiTiNb ternary shape memory alloys fabricated via laser powder bed fusion in-situ alloying

Study on phase transformation behavior and mechanical properties of equiatomic ratio NiTi alloy formed by selective laser melting

The Effects of Ti3Ni4 Precipitates on the R-phase Transformation

Microstructural features, martensitic transformation, and functional properties of multicomponent Ti–Ni based shape memory alloys

The Role of H-phase in Thermal Hysteresis and Shape Memory Properties in Ni50Ti30Hf20alloy

Cryogenic temperature deformation behavior and shape memory mechanism of NiTiFe alloy

Effects of Severe Plastic Deformation and Subsequent Annealing on Microstructures of a Ni50.6Ti49.4 Shape Memory Alloy

Effect of post-heat treatments on the microstructure, martensitic transformation and functional performance of EBF3-fabricated NiTi shape memory alloy

A novel strategy for fabricating phase transforming NiTi shape memory alloy via multiple processes of severe plastic deformation

In-Situ High-Energy Synchrotron X-Ray Diffraction Study of Micromechanical Behavior of Multiple Phases in Ni47ti44nb9 Shape Memory Alloy

An atomistic study of effects of temperature and Ni element on the phase transition and wear behavior of NiTi shape memory alloy

Microstructure and phase transformation of nickel-titanium shape memory alloy fabricated by directed energy deposition with in-situ heat treatment

Zur Biogenese des Erythromycins