Abstract:Hybrid cable-stayed bridges consist of steel and concrete bridge segments, of which steel-concrete joints are of great importance and raise strong research interest. Due to the limitation of the traditional methods, i.e., the member finite element (FE) method and Mixed Dimensional Coupling (MDC) method, the present study proposes a substructure method to model long span bridges. The current application of the substructure method is to extract some specific parts of the whole structure to refine and analyze them. Different from the routine substructure approach, here the entire structure is modeled in detail and divided into many substructures. All the substructures are then condensed into super-elements except the concerned part. The application of the method is then illustrated through numerical studies of the vehicle-bridge coupling vibration of the Jingyue Yangtze River Bridge with a main span of 816 m. The entire bridge is first divided into many substructures with a reasonable length. Among them, the concerned substructure with 23.8 m in length including the steel-concrete joint is modeled in detail but not formed into super-element, while all the other components are modeled in detail and formed into super-elements using the component mode synthesis (CMS) method. All the components including both the super-elements and non-super-elements are then assembled into a complete and fine full bridge model. Finally, the model is used for the vehicle-induced dynamic analysis under deterministic traffic flows. The results show that the joint works well, and the transition between the steel girders and concrete beams is very smooth. (C) 2011 Elsevier Ltd. All rights reserved.

ANALYSIS OF DYNAMIC BEHAVIOR OF NANJING YANGTZE RIVER BRIDGE

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Seismic Response Spectrum Analysis of Main Bridge of Jiangxin Island in Nanjing

Structural Safety Monitoring for Nanjing Yangtze River Bridge

Establishment and Verification of the Baseline 3D Finite-element Model of Existing Railway Steel Truss Bridge

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF TOWER OF CABLE STAYED BRIDGE OF THE SECOND YANGTZE RIVER BRIDGE IN NANJING

Static and Dynamic Behavior of Continuous Box Girder Bridge and Its Experimental Investigation

Dynamic Performance Analysis of Single Tower Self-Anchored Suspension Bridge Using Measured Modal Identification

Dynamic analysis and experimental study of variations of the dynamic parameters of the Runyang suspension bridge

Finite element model updating of existing steel bridge based on structural health monitoring

Dynamic Characteristics of ANSYS-based Continuous Beam Bridge

Health Monitoring For Nanjing Yangtze River Bridge

Analysis of Static and Dynamic Behaviors of Continuous Rigid Frame Bridge with V-Shaped Piers and Seismic Response

Dynamic Behavior Test and Analysis on Continuous Girder Bridge

PROBLEMS OF NODAL RIGID ZONE IN MODELING BRIDGE STRUCTURES FOR DYNAMIC ANALYSIS

New Strategy of Substructure Method to Model Long-Span Hybrid Cable-Stayed Bridges under Vehicle-Induced Vibration

Aseismatic Analysis Of The Steel Structure Of Tianjin Bengbu Bridge

Dynamic Analysis and Design Parameter Optimization for Abnormal-Shaped Pedestrian Bridge with Steel Box Girder

Nonlinear Earthquake-Response Analysis Of Wuhan Junshan Yangtze River Bridge Under Uniform And Non-Uniform Excitations