Abstract:To study the interaction between molten non-eutectic alloys and subcooled water during severe nuclear accidents, an experimental investigation was carried out by injecting molten lead–bismuth non-eutectic alloy (LBNE, 70% Pb-30% Bi) into the water in a free-fall style using the visualized thermo-hydraulic characteristics in melt coolant interaction (VTMCI) facility. The effects of various experimental parameters, including water temperature, melt temperature, melt penetration velocity, and water depth, on the molten LBNE jet fragmentation characteristics were studied. The research shows that compared with lead–bismuth eutectic, larger fragments, less spherical fragments, and more porous debris beds are generated for LBNE. Higher water or melt temperatures facilitate molten LBNE fragmentation, resulting in higher debris bed sphericity and lower debris bed porosity. A higher melt temperature leads to smaller fragment sizes, except that a cake-like debris bed is formed for very high alloy superheat and very low water subcooling. More approximate spherical particles were generated in the film boiling zone than in the thermal interaction zone. Fragment size decreases with an increase in the melt penetration velocity, but the debris bed porosity and sphericity variation was not obvious. The effect of water depth on molten LBNE fragmentation behavior was not obvious under the current experimental conditions. Compared with other fragmentation theories, the Weber number theory better predicted the fragment volume mean diameter. In addition, a melt-jet behavior mode diagram that describes the competition between the hydrodynamic and thermal interactions and diagrams of debris bed porosity and sphericity that show the influence of thermal factors were analyzed in this study.

Experimental Research on Characteristics of Pressure Wave of Molten Stannum Moving in Water

Explosive Experiment of Mild Steel Pressure Vessel and Research on Formula of Explosive Stress

Investigation of pressure and temperature variations and flow pattern evolution during pressurized water injected into lead-bismuth eutectic

An Experimental Study on Steam Explosion of a Small Melt Jet Falling into a Water Pool

Steam cavity and explosion intensity of molten copper column interaction with water

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Loss of Coolant Experiments for the Test Nuclear Heating Reactor

Experimental Investigation and X-Ray Computed Microtomography Simulation on Thermal Physical Properties of Foundation Materials after Molten Salt Leakage in the Storage Tank

Study of the effect of seawater properties on the performance of molten fuel fragmentation

Characteristics of Droplet Formation During Spout Process of Water Ingress Accident

Experimental study on thermal-hydraulic behaviour of LBE and water interface

Experimental Study of a Stoppage Natural Circulation During a Nuclear Heating Reactor LOCA

Experimental and numerical investigations into molten-pool sloshing motion for severe accident analysis of sodium-cooled fast reactors: A review

Analysis Of Effects Of Buoyancy Force On Steam Condensation With Non-Condensable Gases In A Rectangular Channel

Experimental investigation on the characteristics of molten lead–bismuth non-eutectic alloy fragmentation in water

Numerical Study of Fuel Melting and Molten Migration Based on the MPS Method

A simulation research on thermal-pressure coupling loading of a 1:3.2 containment model

Molecular Dynamics Study of Thermal Stress and Heat Propagation in Tungsten under Thermal Shock

Analysis of wave influence on steam condensation with non-condensable gases using cfd

Numerical Simulation of Pressure Wave Propagation and Its Effect on Damage to the Reactor Cavity under TNT Detonation for Steam Explosion

An Experimental Study on the Water Hammer with Cavity Collapse under Multiple Interruptions