Abstract:Modal identification with output-only measurements plays a key role in vibration-based damage detection, model updating, and structural health monitoring in civil engineering. This paper addresses the application of modal identification method to a triangle steel tube truss natatorium using the field measurement data. To obtain dynamic characteristics of the spatial structure, four different output-only system identification methods are employed. They are natural excitation technique–eigensystem realization algorithm, data-driven stochastic subspace identification method, frequency-domain decomposition/frequency-spatial domain decomposition method, and half spectra/rational fractional orthogonal polynomial method. First an analytical modal analysis was performed on the three-dimensional finite element model according to the factual layout design to obtain the calculated frequencies and mode shapes. Then the whole procedure of the field vibration tests on the natatorium was presented. Finally, practical issues and efficiency of the four output-only modal identification techniques are investigated, and compared with the results from a finite element model. The system identification results demonstrate that both methods can provide reliable information on dynamic characteristics of the spatial structure. The frequency-domain methods, however, can quickly identify the modal parameters, but the leakage error introduced by power-spectral density estimation is existent due to the limited length of data. And the time-domain methods can avoid the leakage error, but the computational modes and the computational cost are the main two drawbacks in application. The conclusion is that several system identification methods should be consulted to ensure the accuracy of the estimated modal parameters.

Modal Analysis of Frame Structure Using Time Domain Method

Application of Modal Identification Methods to Spatial Structure Using Field Measurement Data

Damping identification using weighted fitting of Frequency-response-function (WFF) method

Structural Damage Identification Based on Transmissibility in Time Domain

Experimental Study of Modal Parameter Identification in a Simulated Ambient-Excited Structure

Monitoring and Analysis of Temperature's Effect on Frequency of Large Span Spatial Steel Structure

Damage Localization Analysis to Spatial Steel Braced-Frame Structure

A Structural Damage Identification Method Based on Stable Ambient Excitation

Damage Identification of Multi-Box Steel-Concrete Composite Bridges Based on Modal Curvature Difference Method

Damage Assessment of Structures Using Modal Test Data

Damage Identification Analysis of Bridge Beam with Spaced Supports As Quasi-Periodic Structure

Structural modal identification through ensemble empirical modal decomposition

Damage Diagnosis of A Two-Storey Spatial Steel Braced-Frame Model

Modal parameter identification for engineering structures based on HHT method

Damage detection of frame structure using a novel time-domain regression method

Two-stage damage diagnosis approach for steel braced space frame structures

Structural Damage Identification using Modal Data. I: Simulation Verification

Structural damage identification under strong earthquake excitation

Modal Identification of Multi-Degree-of-freedom Structures Based on Intrinsic Chirp Component Decomposition Method

A damage detection method based on strain modes for structures under ambient excitation

Discrete analytical mode decomposition with automatic bisecting frequency selection for structural dynamic response analysis and modal identification