Abstract:International Journal of Aeroacoustics, Ahead of Print. In this study, porous sound-absorbing materials used as a lining in double-panel structure applications (such as high-speed train body structures) to limit flow-induced vibration interior noise were studied, and acoustic optimization design was performed. First, in the wavenumber domain, the cross-spectrum Corcos model was used to characterize the dynamic hydrodynamic pressure of turbulence. Biot's theory is used to model the porous materials. The transmission loss (TL) of the sandwich panel were also determined based on the model superposition method. Three types of sandwich panel structures were considered: air–air (A–A), bonded-bonded (B–B), and bonded-air (B–A). The TL of the three structure types under hydrodynamic pressure was used to evaluate the suppression of flow-induced vibration interior noise in porous materials. The effects of flow velocity, thickness and density of the porous material, and three types of polyimide foam on the TL characteristics of the sandwich panel were investigated. The results show that the flow velocity has a significant influence on the TL of the sandwich panel. The TL of the sandwich panel decreases by 3–4 dB when the flow velocity increases by 100 km/h The B–A configuration has satisfactory sound insulation performance at most frequencies. With an increase in material thickness, the TL of the sandwich panel structure first increases and then decreases, and the material density mainly affects the TL of the structure at intermediate and high frequencies. Based on the objectives of maximizing the average transmission loss (TLavg) and minimizing the structural weight, the acoustic optimization design of the B–A structure was performed, and the balance between the two objective functions was achieved by a nondominated sorting genetic algorithm (NSGA-II). The TLavg s of the sandwich panel structure increased by 5.2 dB when the total mass of the structure was decreased by 0.2 kg.

Optimal Design of Acoustic Performance of a Composite Structure Combined by a Perforated Plate and a Sound Insulation Film Drape

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Effects of structure design on resilience and acoustic absorption properties of porous flexible-foam based perforated composites

A Semi-Empirical Model for Sound Absorption by Perforated Plate Covered Open Cell Foam and Improvements from Optimising the Perforated Plate Parameters

Design of microperforated nanofibrous membrane coated nonwoven structure for acoustic applications

Investigation on the Acoustic Absorption of Flexible Micro-Perforated Panel with Ultra-Micro Perforations

A Novel Multiscale Porous Composite Structure for Sound Absorption Enhancement

Sound absorption performance of micro-perforated plate sandwich structure based on triply periodic minimal surface

Optimization of the Acoustic Performance of a Composite Multi-cell Sound Absorber

Sound Insulation Property of the Composite Structure with Micro-perforated Panels and Honeycomb Core

Acoustic optimization design of porous materials on sandwich panel under flow-induced vibration

Fabrication, sound absorption simulation and performance optimization of multi‐layer gradient fiber‐based composites

Sound absorption performance of a micro-perforated plate sandwich structure based on selective laser melting

Broadband low-frequency sound insulation of double-panel metastructures with a perforated lattice truss-core sandwich plate

Effect of the Laying Order of Core Layer Materials on the Sound-Insulation Performance of High-Speed Train Carbody

A study on diffusion properties of the quadratic residue diffuser structure composited with micro-perforated sheet

An Analytical Study of Sound Transmission Through Stiffened Double Laminated Composite Sandwich Plates

Advance in micro-perforated-panel sound absorbers

Sound absorption performance of folded structures prepared from woven prepreg and porous material composites

A Multiscale Theoretical Approach for the Sound Absorption of Slit-Perforated Double Porosity Materials

Broaden the sound absorption band by using micro-perforated plate back cavities with different cross-sectional areas