Abstract:The noise around the airport, the comfort degree of passengers, the stealth of the aircraft and so on are the important aspects in the design of aircraft. All these requirements need to reduce the noise level of the engine dramatically. Although the micro-perforated plate (MPP) gradually becomes one of the most promising and commonly used noise reduction measures, the fact that the stiffness of the MPP isn’t strong enough for several situations can’t be ignored. The composite structure made of MPP and honeycomb core was put forward to make up for this shortage [1] . In addition, based on the Helmholtz resonator principle [2] , the honeycomb core attached behind the MPP also improves the overall acoustical properties of the composite structure. Nowadays, the studies of the liner’s acoustical properties are usually based on theoretical derivation [3-5] . However, these theoretical formulas introduce several simplifying assumptions inevitably, so more exact methods need to be studied for better prediction of the liner’s characteristics. And we choose to use the numerical simulation method to study the composite structure’s acoustical properties. In this paper, since it is costly in time and economy to take the geometry of the whole structure into account during the simulation, considering the air on the back of the MPP is divided into periodical spaces by the honeycomb, a unit-cell model is extracted from the structure to study the acoustical properties of the composite structure, as Figure 1 shows. First, the reliability of the unit-cell model was verified by comparing the Helmholtz resonator frequency in the internal air cavity with the theoretical values. Then, based on the same unit-cell model, the sound insulation performance of the composite structure was simulated. After that, in order to determine the sound absorption coefficient of the composite structure, a rigid standing wave tube was placed in the upper side of the unit-cell to obtain the standing wave in it. The new unit-cell model was used to approximately simulate the standing wave ratio test. Final, the influences of structural parameters (aperture, porosity, thickness of the MPP etc.) on the sound insulation performance and the sound absorption coefficient were discussed to describe the acoustical properties of the composite structure.

Effects of structure design on resilience and acoustic absorption properties of porous flexible-foam based perforated composites

Sound absorption performance of flexible polyurethane/silicon dioxide perforated coating composites

Investigation on the Acoustic Absorption of Flexible Micro-Perforated Panel with Ultra-Micro Perforations

Finite Element Analysis on Acoustic and Mechanical Performance of Flexible Perforated Honeycomb-Corrugation Hybrid Sandwich Panel

Advance in micro-perforated-panel sound absorbers

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

Sound Absorption of Acoustic Resonant Absorbers with Rough Oblique Perforations

Oblique Incidence Sound Absorption of a Hybrid Structure Using a Micro-Perforated Panel and a Planar Actuator

Low frequency sound absorption and transmission loss performances of perforated corrugated sandwich panels provided by additive manufacturing

Enhanced Low-Frequency Sound Absorption of a Porous Layer Mosaicked with Perforated Resonator

Improvement of the sound absorption performance of sandwich panel using inhomogeneous micro-perforations

Small perforations in corrugated sandwich panel significantly enhance low frequency sound absorption and transmission loss

Effect of Perforation Volume on Acoustic Absorption of the 3D Printed Micro-Perforated Panels made of Polylactic Acid reinforced with Wood Fibers

Design of microperforated nanofibrous membrane coated nonwoven structure for acoustic applications

Analysing the Impact of 3D-Printed Perforated Panels and Polyurethane Foam on Sound Absorption Coefficients

Investigation on Low Frequency Acoustic Characteristics of Parallel-Arranged Microperforated Panel with Aerogel-Filled Back Cavities

Sound Absorption of a Perforated Panel Backed with Perforated Porous Material: Energy Dissipation of Helmholtz Resonator Cavity

Sound absorption performance of a micro perforated sandwich panel with honeycomb-hierarchical pore structure core

Acoustic Properties of Micro-Perforated Panel Absorber Having Arbitrary Cross-Sectional Perforations

Acoustical Properties of the Composite Structures Made of Micro-Perforated Plates and Honeycomb Core

Study on Acoustic Properties of Multilayer Impedance Materials