Abstract:The perforated panels are widely used in noise control and loudspeaker systems. Besides the inner acoustic impedance of each aperture,the interactions among apertures have some effects on the acoustic impedance of the perforated panel. The previous studies on the acoustic impedance of the perforated panel use the following three methods:the simplified analytical methods,the experimental methods and the numerical methods. The aforesaid analytical methods and experimental methods are limited due to some special restrictions. Although the numerical methods can predict the acoustic impedance of the perforated panel accurately,it is not convenient in practical situations. A simple analytical model is proposed to simulate the acoustic impedance of the perforated panel. Considering each aperture in the perforated panel as a sound source,the total sound field radiated by the system is the sum of each individual sound field radiated by each aperture. The mutual radiation impedance between one aperture and other apertures is obtained on the basis of the self radiation impedance of the aperture. Then the total impedance of each aperture,including the inner impedance and the radiation impedance,can be obtained. And the total acoustic impedance of the perforated panel can be derived. The proposed model and the previous model are applied to simulate the acoustic impedances of two perforated panels with different perforations,and the differences between two models are compared. It is shown that when the frequency increases,the interactions among apertures become small,and the difference between the acoustic impedances calculated by two models decreases. It is also found that when the distance among apertures increases,the interactions among apertures become small. The equivalent circuit method is used to calculate the frequency responses of actual loudspeaker systems with the perforated panels in front of the loudspeakers,and the acoustic impedances of the perforated panels are calculated with both of the mentioned two models. The frequency responses of the actual loudspeaker systems are also measured in an anechoic chamber. For the loudspeaker system with a single aperture in the perforated panel,both of the simulated frequency responses are similar to the experimental results. For the loudspeaker system with three or seven apertures in the perforated panel,the simulated frequency response calculated by the proposed model is closer to the experimental result,and the other simulated frequency response calculated by the previous model diverges a lot from the experimental result,especially for the resonant frequency in the medium-high frequency range. And the resonant frequency is determined by the acoustic reactance of the perforated panel and the acoustic compliance of the front cavity. It is confirmed that the proposed model is more accurate as the interactions among apertures have large effects on the acoustic impedance of the perforated panel when the distance between apertures is not large.

A study on diffusion properties of the quadratic residue diffuser structure composited with micro-perforated sheet

Insert loss experiment and acoustic impedance theoretical study on the noise barrier with MPP-QRD top structure

Design and Acoustical Performance Investigation of Sound Absorption Structure Based on Plastic Micro-Capillary Films

A Note on Using Panel Diffusers to Improve Sound Field Diffusivity in Reverberation Rooms below 100 Hz

Optimal Design of Acoustic Performance of a Composite Structure Combined by a Perforated Plate and a Sound Insulation Film Drape

Sound Absorption of Acoustic Resonant Absorbers with Rough Oblique Perforations

Investigation on the Acoustic Absorption of Flexible Micro-Perforated Panel with Ultra-Micro Perforations

Study on Noise Reduction Performance of Sound Barrier with Acoustic Diffusers

Advance in micro-perforated-panel sound absorbers

Some numeric and experimental study of micro-perforated panel acoustic absorbers with heterogeneous cavities

Ultra-broadband and Planar Sound Diffuser with High Uniformity of Reflected Intensity

Sound absorption of a flexible micro-perforated panel absorber based on PVDF piezoelectric film

Enhanced Low-Frequency Sound Absorption of a Porous Layer Mosaicked with Perforated Resonator

The Perforated Panel Resonator with Flexible Tube Bundles and Its Appliations

Research on Sound Absorption Performance of Ultra-Thin Metal Micro-Perforated Panel Absorber

Study on Sound Absorption Performance of Aluminum Foam Combination

Sound absorption performance of a micro-perforated plate sandwich structure based on selective laser melting

Sound-scattering Properties of Sierpinski Triangle Fractal Structures in the Near Field

A study on the acoustic impedance model of perforated panels

Improvement of the sound absorption performance of sandwich panel using inhomogeneous micro-perforations

Diffuse Sound Absorptive Properties of Parallel-Arranged Perforated Plates with Extended Tubes and Porous Materials