Abstract:The pile foundation cutting and underpinning process during shield tunnelling significantly impacts the stability of bridge substructures. In this paper, the shield tunnel area from Hongguzhong Avenue Station to Yangming Park Station of Nanchang Metro Line 2 was taken as the research subject, which crosses the pile foundation underpinning project of the south approach section of Bayi Bridge. Through numerical simulation and on-site monitoring analysis, the influence of the active underpinning process of shield tunnelling pile foundation on the deformation of bridge substructure was studied. First, through analyzing on-site conditions and comparing technical solutions, an active gantry bridge pile foundation underpinning technology was proposed, and the specific construction steps were determined. On this basis, for the C15 pile foundation with the most complex working conditions, ABAQUS software was applied to simulate the jack-up, unloading and pile-cutting process during the pile foundation underpinning construction, and the displacement development of the bridge pier, underpinning beam and new pile during the whole construction process were analyzed. Finally, through on-site monitoring data analysis, the technology’s feasibility and safety were further verified. At the same time, according to the analysis of the monitoring results of the bridge piers, underpinning beams and new piles, the results from the finite element software were nearly the same as the trend shown by the monitoring results, and the displacement of the main structures of the lower part of the bridge was small and within the control range. The above research work verified the applicability of the active gantry type bridge pile foundation underpinning technology in the pile foundation underpinning condition of the single-column single-pile bridge in the narrow space curved bridge section, and is worthy of further promotion and application.

Design of Test Platform of Simultaneous Grouting System of Shield

Design of Experimental Device for Simultaneous Grouting Test Platform of Shield Machine

STUDY OF GROUND HEAVE AND SUBSIDENCE INDUCED BY SHIELD TUNNELLING IN SOFT GROUND

Influences of grouting heave on overlying structures in shield tunneling

Prediction of Ground Surface Movements Due to Shield Tunneling with Tail Grouting Heave

ANALYSIS OF GROUND SURFACE DISPLACEMENT AND HORIZONTAL MOVEMENT OF DEEP SOILS INDUCED BY SHIELD ADVANCING

Design and Study on a Simulating Platform of Shield Thrust System

Research on longitudinal nonlinear seismic response of shield tunnel

Analysis for Ground Deformation Induced by Undercrossed Shield Tunnels at a Small Proximity Based on Equivalent Layer Method

Mechanical structure and hydraulic system design of 1.2 m simulated shield machine

Study on Similarity of Shield Grouting Platform

Condition Monitoring System of Simulator Test Rig for Shield Tunnelling Machine

Design of Hydraulic Thrust System of Shield Simulated Test Platform

Hydraulic System Integration and Experimental Analysis of Shield Tunnelling Machine for Simulator Test Rig

Analysis of Coupled Seepage and Stress of Shield Tunnel Launching Accident in Soft Clay

Full-Scale Experimental Study on the Effect of Ground Surcharge on the Stress and Deformation of Shield Tunnels

A computational method proposal on the determination of grouting parameters for shield construction in water-rich earth materials

Analysis of Forces and Deformation Rule of Existing Shield Tunnel Caused by Ground-heaped Load

Simulation of impact load on ship-platform collision

Model Test Study on the Influence of Ground Surcharges on the Deformation of Shield Tunnels

Investigation on the Influence of Active Underpinning Process on Bridge Substructures During Shield Tunnelling: Numerical Simulation and Field Monitoring