Abstract:The hot-section parts easily occur the creep-fatigued interaction under the condition of mechanicalthermal coupled load during the period of service, which may lead to the damage of the parts, and therefore, the measurement and characterization of thermal-deformed fields of the parts are important to understand its damage process. Aiming at relevant demand, the bilateral telecentric-multispectral imaging system was established, the research of synchronous measurement technique of the temperature and deformation fields was developed. On the one hand, the measurement technology for surface temperature of the object was developed using the two-color images captured by the multispectral camera with bilateral telecentric lens and combined with colorimetric method. On the other hand, the 2 D-DIC measurement technique of the multispectral camera was developed by conducting digital image correlation analysis using the blue light images before and after deformation, which can measure the high temperature deformation field of the object（the blue light images were filtered by multispectral camera）.Results showed that the bilateral telecentric lens is used to replace the ordinary optical lens for imaging,which can effectively eliminate the distortion of the multispectral imaging system. Since the temperature measurement process of this measurement system is little affected by the emissivity of the object, therefore, it has excellent robustness. The thermal expansion coefficients of the nickel alloys are evaluated at the temperature ranges of 700–1000℃, indicating this system can achieve the synchronous and precise measurement of the temperature and deformation fields of the object.

Application of USB Camera in the Piston Thermal Fatigue Test

Improved Apparatus for Inline Measurement of Residence Time Distribution of Thermomechanically Complex Systems

Extracting Thermal Crack in Piston Using Basic Digital Image Subtraction Algorithm

Cutting Temperature and Force Data Acquisition and Measuring System Design in High Speed Machining

Extracting Thermal Crack in Piston Using Dynamic Image Difference Method

Development on Friction Measurement System for Pneumatic Cylinders

Measuring and Controlling System of the Accelerated Bearing Life Tester with Auto-loading

Automatic Control System of Piston Thermal Shock Test Bench Based on Embedded PC

Metallographic study of laser thermal fatigue damage on piston

Analysis of thermal-mechanical coupling strength and fatigue life of cylinder head

Characterization of In-Cylinder Combustion Temperature Based on a Flame-Image Processing Technique

Design and Implementation of Testing Device for Damping Oil Bulk Modulus and Fatigue Characteristic

Development of Tribo-tester for Tribological Studies of Piston Ring/Bore Pair

OVERVIEW ON THE THERMOGRAPHIC METHOD FOR FATIGUE RESEARCH

Development of the High-speed Sliding-rolling Contact Friction Testing Machine

GSM Modem and Industrial Camera Aided Unattended Automatic Fatigue Testing Technology

Experiment and numerical simulation study of thermal fatigue of an aluminum alloy piston

Research on Synchronous Measurement Technique of Temperature and Deformation Fields Using Multispectral Camera with Bilateral Telecentric Lens

A New Method Of Two-Color Calibration And One-Color Measurement For Real-Time Inspection Of Temperature Field

The temperature measurement method based on the image of mechanical part during heating treatment

Overcoming High Luminance Gradient Using Serial Exposure Time Method for Synchronous Full-Field Measurement of Temperature and Deformation