Influence of Gas Void and Gas Crack Defects on Electrical Tree Initiation in Silicone Rubber

Zheng-zheng CHEN,Zi-xiang CHENG,Yuan-xiang ZHOU,Qiong NIE,Hai-hang CHEN,Shao-wei GUO,Rui LIU
2009-01-01
Abstract:As a novel internal insulating material, the application of silicone rubber (SIR) in power cable accessories becomes more and more widely in recent years. However, few studies were focused on the influence of defects on the electrical tree characteristics and the damage mechanism of such insulation is still unknown. Two kinds of defects, gas void defects and gas crack defects, were manufactured to simulate the actual defects in prefabricated cable accessories. The influence of defects on the characteristics of electrical tree initiation in SIR under 50 Hz ac voltage was studied in this paper. The electrical tree initiation voltage and the shapes in SIR specimen without defects, with gas void defects and gas crack defects were measured via digital micro-imaging system. It was found that the gas void defects has little effect on the characteristic of electrical tree initiation in SIR, while the gas crack defects has great effect on the characteristic of electrical tree initiation. Compared to the specimen without defects, tree initiation voltage of specimen with gas void defects decreases slightly, but tree initiation voltage of specimen with gas crack defects decreases considerably. The kind and probability of tree initiation shape appears in specimens with gas void defects are approximately in accordance with the specimens without defects. However, only branch-tree appears in the specimens with gas crack defects. It is analyzed that the characteristics of electrical tree initiation is slightly affected by gas void defects can be due to the great resistance of oxidation of SIR. While the gas crack defects conduces to mechanical damage and stress concentration. This leads to the great effect on the characteristic of electrical tree initiation.
What problem does this paper attempt to address?