Abstract:In actual engineering, the drive axle of vehicles is often enlarged to prevent it from being damaged. However, the enlargement will increase the weight of the vehicle, pushing up fuel consumption and exhaust emissions. This common practice is obviously detrimental to the environment and sustainable development. To meet the stiffness and strength requirements on the drive axle housing of Steyr heavy trucks, this paper carries out finite-element analysis on the stiffness and strength of the axile housing under different working conditions, in the light of its actual stress features. According to the production process of drive axle housing in truck, the authors reviewed the development of the materials for high-strength axle housing, which could be properly formed through hot stamping, cold stamping, and mechanical expansion, and briefly introduced the structural features of drive axle housing. Then, a drive axle model was established in the three-dimensional (3D) drawing software Pro/ENGINEER, and converted into a finite-element model in Pro/Mechanica by calling the meshing command. On this basis, the static load of axle housing was analyzed under four working conditions: maximum vertical force, maximum traction, maximum braking force, and maximum lateral force. Finite-element analysis was performed on the meshed model to obtain the displacement and stress cloud maps of the axle housing under each working condition. The results show that the drive axle housing satisfy the requirements on strength, stiffness, and deformation. To sum up, this research improves the design efficiency and quality of products through finite-element analysis on the stiffness and strength of drive axle housing.

Strength Analysis for the Rear Axle of Corn Harvester

Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method

A Ductility-Centred Analytical Model for Axially Restrained Double-Span Steel Beam Systems Subjected to Sudden Columns Loss

Loading Design for Comprehensive Performance Test Bench of Drive Axle Assembly

A Study on Intensification Coefficient Model for Half Shaft of Automotive Driving Axle Based on Lab Test

Reliability Verification and Analysis of Scissor Grab ’Axle Pin

Finite Element Analysis on the Rear Axle Housing of Vehicle

RESEARCH ON THE BREAKAGE MODE AND ANALYTIC MODEL OF CIRCULAR TUBULAR X-JOINTS

Ultimate Strength of the Circular Tubular X-joints

Bridge Vehicle Load Model on Different Grades of Roads in China Based on Weigh-in-Motion (WIM) Data

Research on Fatigue Intensifying Test of Driving Axle and Estimating Confidence Interval of Fatigue Life

Simulation of a Multi-Axial Loading Fatigue Test of the Rear Drive Axle of a Minivan

Rear Axle Housing Analysis Based on Simulation of Dynamic Vehicle Model

The Application of Value Analysis Method in Rear Axle Tube Design

Comparison of finite element analysis results with strain gauge measurements of a front axle housing

Simulation of the Vertical Bending Fatigue Test of a Five-Link Rear Axle Housing

Finite Element Analysis and Structure Design for Chassis of Aircraft Towbarless Tractor

Finite Element Analysis of a Flexible Ferris Wheel

Finite Element Modeling and Analysis on Double Wishbone Suspension with Twin Torsion Bar

Design and Simulation Analysis of Weeding Machine Chassis Based on CATIA and ADAMS

Finite-Element Analysis on Lightweight Material of Drive Axle Housing