Abstract:In the field of civil aviation, the nose landing gear is a critical component that is prone to damage during taxiing. With the advent of new technologies such as towing taxi-out and hub motors, the nose landing gear faces increasingly complex operational environments, thereby imposing higher performance demands. Ensuring the structural safety of the nose landing gear is fundamental for the successful application of these technologies. However, current research on aircraft nose landing gear under these new conditions is somewhat lacking, particularly in terms of reliable analysis models for real-world scenarios. This study focuses on a typical Class C aircraft, specifically the B-727 model, for which a finite element model of the nose landing gear is developed. Modal testing of the aircraft's nose landing gear is conducted using the impact hammer method, and the results are compared with those from the simulations. The experimental data indicate that the error range for the first seven natural frequencies is between 0.23% and 9.27%, confirming the high accuracy of the developed landing gear model. Furthermore, with towing taxi-out as the primary scenario, a dynamic model of the aircraft towing system is established, and an analysis on the structural strength and topological optimization of the nose landing gear under various conditions, including high speeds and heavy loads, is performed. The results show that the developed model can effectively support the analysis and prediction of the mechanical behavior of the nose landing gear. Under high-speed, heavy-load conditions, the nose landing gear experiences significantly increased loads, with the maximum deformation primarily occurring at the lower section of the shock strut's outer cylinder. However, no damage occurred. Additionally, under these conditions, an optimized structural design for the landing gear was identified, which, while ensuring structural strength, achieves a 22.32% reduction in the mass of the outer cylinder, also ensuring safety in towing taxi-out conditions.

Finite Element Analysis and Structure Design for Chassis of Aircraft Towbarless Tractor

Structural Analysis of Agricultural Truck Frame Based on the Finite Element Method

Lightweight design of aircraft truss based on topology and size optimization

Finite Element Analysis of a Flexible Ferris Wheel

Finite Element Analysis in Automobile Chassis Design

Design, static and dynamic analysis of automobile chassis

Design and Simulation Analysis of Weeding Machine Chassis Based on CATIA and ADAMS

Finite Element Analysis on the Rear Axle Housing of Vehicle

Vehicle Structural Design and Analysis in Maglev Experimental Line

Finite element analysis and optimization of tractor gearbox body under various kinds of working conditions

Finite-Element Analysis on Lightweight Material of Drive Axle Housing

Structural Strength Analysis and Optimization of Commercial Aircraft Nose Landing Gear under Towing Taxi-Out Conditions Using Finite Element Simulation and Modal Testing

Finite Element Modeling and Analysis on Double Wishbone Suspension with Twin Torsion Bar

Strength Analysis and Optimal Design for Main Girder of Double-Trolley Overhead Traveling Crane Using Finite Element Method

Optimum Design and Trafficability Analysis for an Articulated Wheel-Legged Forestry Chassis

Mechanics Modeling and Simulation Analysis of a Novel Articulated Chassis for Forestry

Structure Improvement and Finite Element Analysis of Planetary Gear Rack of Loader

Finite Element Analyses and Design Proposals on the Truss-to-Box Girder Connection Models of Xinqiao International Airport Terminal

Performance Matching and Analyzing of Multi-axis Special Vehicles Chassis

Design of a precision planter chassis using computer-aided engineering and experimental validation

Stress Optimization of F1 Car Chassis Using FEA Technique