Abstract:Abstract Autoclaved aerated concrete (AAC) block masonry has been widely used for bearing walls of multi-story buildings or non-bearing walls of high-rise buildings because of its unique advantages, such as lightweight, low pollution output, and excellent thermal insulation performance. However, traditional AAC block masonry has the disadvantages of high water absorption, poor adhesion to mortar, and low construction efficiency. In order to improve the performance of traditional AAC masonry, this paper proposed a new kind of mortar-free AAC block masonry with concrete core-columns. Fundamental mechanical properties of compression and shear were studied. We divided a total of 16 compression specimens into four groups according to different hollow ratios and strength grades of the block, and eight shear specimens into two groups based on different hollow ratios. Each specimen consists of three-layer blocks with two core columns at the point of quadri-section. The diameters of columns were, respectively, 100 mm and 80 mm. The specimens were loaded at a constant speed to evaluate their bearing capacity, displacement response, crack development, and damage state. The formula of the average values and design values of the compressive and shear strength of masonry were obtained statistically. The stress–strain constitutive relation of masonry expressed by a three-stage curve was presented. Furthermore, the result of numerical analysis using the ABAQUS finite element program aligned well with the experimental results. The compressive strength and shear strength of the new type of masonry are no less than traditional AAC masonry, and new masonry has higher construction efficiency and more stable strength.

STUDY ON THE STRENGTHENING BRICK MASONRY COLUMN UNDER SMALL ECCENTRIC COMPRESSION BY CEMENT-BASED GROUTING MATERIAL

AXIAL BEARING CAPACITY OF HIGH STRENGTH GROUTED CONNECTIONS WITH SHEAR KEYS

Experimental study on seismic behavior of precast concrete column with longitudinal reinforcement grouting-anchoring connections

Experimental Research on Eccentric Compressive Performance of Steel Tube-Reinforced Concrete Column

Flexural-Shear Behavior of High-Strength Concrete Short Columns

Mechanical Behavior of Masonry Columns Strengthened with Basalt Textile Reinforced Concrete under Eccentric Loading: Experimental Investigation and Analytical Modelling

Compressive Behavior of Masonry Columns Confined with Basalt Textile-Reinforced Concrete

Experimental Research on Biaxial Compressive Strength of Grouted Concrete Block Masonry

Experimental Study on the Seismic Performance of Brick Walls Strengthened by Small-Spaced Reinforced-Concrete–Masonry Composite Columns

Experimental study on the eccentrically compressive performance of square masonry columns repaired with UHPC jackets

Experimental Study of Anisotropic Strength Characteristics of Grouted Concrete Block Masonry

Axial compressive performance of masonry columns strengthened with ECC jacket and FRP strips

Experimental Study on Basic Mechanical Properties of Core-Column Non-mortar Aerated Concrete Block Masonry

Experimental Study on Low Strength Brick Masonry Wall Strengthened with Self-compacting Concrete Wall

Test Study on Strengthening RC Flexural Members with Grouting Material

Experimental Studies on Bearing Capacity of Reinforced Block Short-Leg Masonry Shear Wall under Eccentric Compression

Experimental Study of Grouted Concrete Block Masonry's Biaxial Compressive Strength

EXPERIMENTAL STUDY ON BASIC MECHANICAL BEHAVIOR OF A NEW TYPE CONCRETE HORIZONTAL-HOLE HOLLOW BLOCK MASONRY

Experimental study on compressive behavior of green chain block masonry

Prediction of Compressive Stress-Strain Curves of Grouted Masonry

Eccentric Compression Performance of Core-Steel Tube with T-Shaped Steel Reinforced Concrete Column