Abstract:The 50 m box girders in the tidal flat section of unnavigable channel bridge in Hangzhou Bay Bridge adopt the approach of trolley on the under bridge to transport and erect the girder. Based on the actual working and load conditions, a precise 3D solid FEM simulation model is established by taking account of the space effects of prestressing force, applying equivalent node force and taking reasonable consideration of support details, etc. The values for concrete characteristics are determined according to current specifications for the design of highway bridge. The load is calculated with the consideration of the worst factors. The bottom of the support is simulated as rigid element. Modulus of elasticity for girder contact layer will not appear tensile stress when rotations and deformations occur at girder end. Element mesh should be as subdivided as possible when the structure is discretized. Owing to the relative complexity of the stress at girder end, thicker than span intermediate element mesh is adopted for girder end. The integral deformation and the space stress distribution of weight-bearing box girder are calculated. Results indicate that the deformation is relatively small and the maximum deflection is within the reversed arch because the load is quite close to the support. The maximum main tensile stress of the support section occurs at the side of bottom plank surface, which exceeds concrete cracking strength. Consequently, concrete in this area should be treated and stiffened so as to avoid it from cracking. When the maximum main compressive stress occurs near the stabilizer of girder-erecting machine, its value is less than the compressive strength of concrete.

Finite Element Analysis on Structure of Suspension Bridge with APDL

Experimental Study and Numerical Analysis of A Composite Bridge Structure

An analytical method and its application for large-section PC box girder bridges

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Cable force adjustment and post-adjusting nonlinear analysis of a cable-stayed bridge based on ANSYS

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Analysis of the influence of open-cut undercrossing of a national highway in Hangzhou on the existing municipal viaduct piers

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Structural Optimization Design of Steel Tubular Arched Bridge Based on APDL

Analysis of Support Abutments of Curved Bridges with Single-pedestal Piers

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Analysis of Prestressed Concrete Bridge with Virtual Laminated Element Method

4D Full-Scale Finite Element Analysis in Bridge Engineering

Finite element analysis of control loads based on damage bridge

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Field load test and Performance Evaluation of Rainbow Bridge with Sling and Leaning Tower Curved Arch