Abstract:Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification's allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.

Finite element analysis of control loads based on damage bridge

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Finite element analysis and test study of dynamic behavior of a cable-stayed bridge

Simulating analysis of cantilever casting of prestressed concrete bridge

Accurate FEM of Steel-Concrete Composite Box Girder Bridge for Damage Identification Based on Dynamical Experimental Study

Research on Methods of Damage Diagnosis Based on Bridges with Dynamic Characteristics

Finite Element Analysis in Dynamic Conditions of Bridge Crane Beam

4D Full-Scale Finite Element Analysis in Bridge Engineering

Study on Static and Dynamic Behavior of T-Frame Bridge Reinforced by External Tendons

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Structural-Health-Monitoring-Oriented Finite Element Model for a Specially Shaped Steel Arch Bridge and Its Application

Finite element analysis of ultimate bending bearing capacity for a multi-span extradosed bridge based on Willam-Warnke yield criteria

Finite Element Simulation Analysis of Tied Arch Bridge with All Solid Elements Model

Fatigue Damage Evolution Of Steel Bridges Based On Multi-Scale Finite Element Modeling

Nonlinear Finite Element Analysis for a Prestressed Continuous Rigid Frame Concrete Bridge

Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method

MULTI-SCALE MODELING AND ANALYSES ON STRUCTURAL DETERIORATION AND DAMAGE IN LONG-SPAN BRIDGES AND ITS APPLICATION

Analysis of Static and Dynamic Behaviors of Continuous Rigid Frame Bridge with V-Shaped Piers and Seismic Response

Damage Analysis of Box Girder Based on a Vehicle–Bridge Interaction System