Abstract:In a proton exchange membrane fuel cell (PEMFC), the membrane electrode assembly (MEA) is the core component and the region of the oxidation–reduction. In order to obtain a great performance, Pt with excellent catalyst efficiency is usually adopted in PEMFC as the catalyst. However, the high cost and poor durability remain the two major challenges in the application of PEMFC; thus, it is worth paying attention to enhance the utilization of the Pt catalyst and the stability of PEMFC. In this work, the Nafion array membrane with a larger specific surface and higher proton conductivity was applied to the cathode catalyst layer (CL) to prepare the ordered MEA. In order to improve the three-phase interface of the cathode CL, Nafion was adsorbed on the Pt particles as the proton conductor to expedite the proton transfer efficiency based on the principle that sulfonic acid is easily adsorbed on the Pt surface. In this case, the peak power density of PEMFC with Nafion absorption on the Pt surface is up to 843 mW cm–2 at the Pt loading of 61.4 μg cm–2, which is much higher than that of the fuel cell without a proton conductor on the Pt catalyst in the cathode CL (710 mW cm–2). Besides, the durability tests show that PEMFCs with Nafion absorption on the Pt catalyst surface can work continuously for 100 h without obvious voltage attenuation, which is more stable than that of the bare Pt for 70 h. In conclusion, Nafion as the proton conductor was adsorbed on the Pt catalyst surface of the cathode CL to enhance the triple-phase interface in PEMFC, which is expected to be a universal method to prepare PEMFCs with high stability and peak power density at a low preparation cost.

Defining optimal composition of catalyst layer in PEMFC electrodes by orthogonal test method

Optimizing Catalyst Layer Composition of PEMFC by Orthogonal Method

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Ultrathin Nanoporous Metal Electrodes Facilitate High Proton Conduction for Low-Pt PEMFCs

Performance improvement of ultra-low Pt proton exchange membrane fuel cell by catalyst layer structure optimization

Optimization of Pt-Ni Alloy Catalysts Synthesized by Potentiostatic Electrodeposition for Cathode in PEMFC

Optimizing design of catalyst layer structure with carbon-supported platinum weight ratio mixing method for proton exchange membrane fuel cells

Improving the High-Current-Density Performance of PEMFC Through Much Enhanced Utilization of Platinum Electrocatalysts on Carbon

Gradient design of Pt/C ratio and Nafion content in cathode catalyst layer of PEMFCs

A Study on Novel Pulse Preparation and Electrocatalytic Activities of Pt/C-Nafion Electrodes for Proton Exchange Membrane Fuel Cell

Preparation and Performance of Anode Catalysts Pt/C for PEMFC

High-performance anode for Polymer Electrolyte Membrane Fuel Cells by multiple-layer Pt sputter deposition

The influences of catalyst combination on the high temperature proton exchange membrane fuel cell

Numerical Optimization of Triple-Phase Components in Order-Structured Cathode Catalyst Layer of a Proton Exchange Membrane Fuel Cell

Effect of Electrode Composition on the Performance of Proton Exchange Membrane Fuel Cell

Insights into properties of non-precious metal catalyst (NPMC)-based catalyst layer for proton exchange membrane fuel cells

Enhanced Triple-Phase Interface in PEMFC by Proton Conductor Absorption on the Pt Catalyst

Preparation of Oxygen Reduction Catalyst Electrodes by Electrochemical Acidification and Synergistic Electrodeposition

A Pt content and pore structure gradient distributed catalyst layer to improve the PEMFC performance

Research on Electrocatalysts of Proton Exchange Membrane Fuel Cells

Semi-ordered catalyst layer with ultra-low Pt loading for proton exchange membrane fuel cells