Abstract:Molten salt electrolytic synthesis of silicon is identified as a potential industry method due to its thorough deoxidization of oxide and short-flow synthetic progress. However, figuring out a more efficient and sustainable strategy for the increase of the reduction process as well as the control of product morphology still needs endless research. In this study, benefiting from the high electrical conductivity of metallic silver and the easy separation of silver from silver-silicon alloys during the electrolysis of SiO 2 , metallic silver was introduced to electric-catalyze the production of silicon. Firstly, metallic silver was introduced into the silica matrix by a simple silver mirror reaction. Secondly, the mixed Ag\SiO 2 precursor was located at the cathode for molten salt electrolysis. Finally, silicon nanowires were herein achieved in molten NaCl–CaCl 2 . Mechanisms of metal Ag played during the electric-polarization process of silica and the electrochemical nucleation of silicon were further analyzed by X-ray diffraction (XRD), Scanning Electron Microscope (SEM), Field-Emission Scanning Electron Microscope (FESEM), Transmission Electron Microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Raman spectra. The results demonstrate that Ag helps construct Si nanowires via a classic Ag-Si binary alloy-droplet process and provided quantitative guidance for the large-yield production of silicon nanowires via adding 0.08–0.17 g Ag versus 1 g SiO 2 , controlling the temperature at 850–900 °C and electrolysis voltage at 2.6–2.8 V (2.6V at first 1 h and 2.8V at last 5 h). The synthesized silicon nanowires present two types of linear structures based on two three-phase interlines (3PIs) models and a streamed long-straight nanowire is observed.

Fabrication of Silver Nanotube by SiO2 Assistant Phase-Separation Method

Facile Route to Silver Nanotubes

In stiu preparation of silver nanoring with electron beam-induced method

Fabrication of Ag2SiO3/SiO2 Composite Nanotubes Using a One-Step Sacrificial Templating Solution Approach

Plasma-assisted speedy synthesis of mesporous Ag 2 O nanotube

Silver(I)-Coordinated Organogel-Templated Fabrication of 3d Networks of Polymer Nanotubes

Sonochemical Synthesis of Amorphous Long Silver Sulfide Nanowires

Research on synthesis and nucleation mechanism of silicon nanowire by silver catalysis in molten salt

Separating Nucleation from Growth for High-Yield Synthesis of Thin Silver Nanowires

Fabrication and characterization of polycrystalline silicon nanowires with silver-assistance by electroless deposition

Fabricating Silicon Nanotubes by Electrochemical Exfoliation and Reduction of Layer-Structured CaSiO3 in Molten Salt.

The fabrication of short metallic nanotubes by templated electrodeposition

Fabrication of silica nano/micro-fibers doped with one-dimensional assembly of silver nanoparticles.

Synthesis of Silver Nanotubes by Electroless Deposition in Porous Anodic Aluminium Oxide Templates

The Preparation of Anodic Aluminum Oxide Ceramic Template and the Fabrication of Silver Nanowires

Metal Nanotubes Prepared by a Sol–gel Method Followed by a Hydrogen Reduction Procedure

Fabrication, Formation Mechanism, and Magnetic Properties of Metal Oxide Nanotubes Via Electrospinning and Thermal Treatment

Fabrication of Silver Nanostructures by Microwave-Assisted Method

Fabrication and characterization of silver core and porous silica shell nanocomposite particles

Fabrication of Single-Walled Carbon-Nanotube with Metallic Electrodes

A simple method to synthesize Si3N4 and SiO2 nanowires from Si or Si/SiO2 mixture