Abstract:The air-fuel mixture preparation in pilot spray-ignited natural gas engines is primarily dominated by piston bowl profiles and fuel injection strategy. Piston bowl geometry is regarded as the crucial point in controlling engine pollutant emissions. In the present work, the SAGE combustion model was applied coupled with a general reaction kinetic mechanism. The engine model was validated with experimental data achieved from a Cummins ISX 400 engine, and good agreement between predicted and measured in-cylinder pressure and heat release rate was obtained. The influence of various piston bowl designs, including Mexican-hat geometry, double-lip geometry, bow geometry, and toroidal geometry, on the combustion process, engine performance, and pollutant emissions of a high-pressure direct-injection natural gas engine have been studied and analyzed numerically. The present study confirms the benefit of the piston bowl design as a beneficial tool to enhance the performance and pollutant emissions of the pilot diesel-ignited natural gas engine. Results showed that different chamber shapes slightly influence the combustion initiation, and the difference in in-cylinder pressure presents noticeable as the combustion continues. A higher turbulent kinetic energy improves the flow movement and facilitates the mixture formation in the cylinder. However, the combustion behavior is unwished caused by the improper injection angle of natural gas. Increasing the recess depth of combustion chambers reduces NOx formations at the price of sacrificing fuel economy. For the bow combustion chamber design, the NOx emission declined by 31.1%, while the indicated specific fuel consumption increased by 5.5% compared with the original engine. Although the indicated mean effective pressure and specific fuel consumption of the optimal double-lip geometry almost remain the same, NOx emissions can be reduced by 16.7% compared with the base design.

Effect of Piston Shape on SI NG Engine Performance

Effect of Bowl-in-Piston Chamber on the Combustion Process in a Stoichiometric Natural-Gas Spark-Ignition Engine

Numerical Simulation Of Re-Entrant Bowl Effects On Natural-Gas Spark-Ignition Operation

Effect Of Piston Crevices On The Numerical Simulation Of A Heavy-Duty Diesel Engine Retrofitted To Natural-Gas Spark-Ignition Operation

Two-Stage Lean-Burn Combustion Inside a Natural-Gas Spark-Ignition Engine with a Bowl-in-Piston Chamber

Effect of Piston Crevices on 3D Simulation of a Heavy-Duty Diesel Engine Retrofitted to Natural Gas Spark Ignition

Numerical Simulation of Re-Entrant Bowl Effects on Natural Gas SI Operation

An Experimental Investigation of Early Flame Development in an Optical Spark Ignition Engine Fueled with Natural Gas

Optical and Numerical Investigations of Flame Propagation in a Heavy Duty Spark Ignited Natural Gas Engine

Effect of Spark Timing on the Combustion Stages Seen in a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

Computational analysis of piston shape effects on in-cylinder gas flow, fuel-charge mixing, and combustion characteristics in a two-stroke rod-less spark ignition opposed-pistons engine

Numerical Investigations of Injection Timing Effects on a GDI Engine Performance: Part B, In-Cylinder Emission Formation and Oxidation Process

Experimental investigation of the influence of pre-chamber structural parameters on combustion and emission characteristics of a high compression ratio SI engine

Effect of a novel piston geometry on the combustion process of a light-duty compression ignition engine: An optical analysis

Implementation of various bowl designs in an HPDI natural gas engine focused on performance and pollutant emissions

Effect of piston bowl geometry and compression ratio on in-cylinder combustion and engine performance in a gasoline direct-injection compression ignition engine under different injection conditions

Influence of piston bowl geometry on combustion and emission characteristics

Influence of Heat Transfer of Combustion Chamber Wall on the Performance of Gasoline Engine Based on Polishing Technology under Different Compression Ratio and Air-Fuel Ratio

Effects of piston shapes and swirl ratios on combustion and emissions of a natural gas engine ignited by micro diesel pilot

Effect of piston bowl geometry and spray angle on engine performance and emissions in HCCI engine using multi‐stage injection strategy

Numerical study of piston bowl geometries on PFI-HCCI engine performance