Effects of piston shapes and swirl ratios on combustion and emissions of a natural gas engine ignited by micro diesel pilot

Jianqin Fu,Chao Li,Feng Zhou,Jun Shu,Jingping Liu
DOI: https://doi.org/10.1039/d3se00428g
IF: 6.813
2023-06-14
Sustainable Energy & Fuels
Abstract:A reduced chemical kinetic mechanism was coupled with computational fluid dynamics (CFD) model to explore the detailed influencing mechanism of swirl ratios and piston shapes on a micro diesel pilot ignited (DPI) natural gas (NG) engine. Based on the calibrated CFD model, the influences of swirl ratios and piston shapes on the combustion and emissions characteristics in DPI NG engine were studied in detail and some new findings were obtained. The Pmax and maximum heat release rate (HRR) increase first and then decrease with the rise of swirl ratio in different piston shapes, and the location of Pmax is advanced from 14.7 °CA to 11.3 °CA when the piston shape is changed from P0 to P3. The ignition delay significantly becomes shorter as the swirl ratio rises from 0.5 to 2.0, while it turns to be longer in the piston with larger opening size and shallower groove. Meanwhile, this piston shape leads NOx emissions to decrease and the maximum reduction reaches 1446 ppm and 836 ppm in Case 1 and 2, respectively. Except for P3, when the swirl ratio increases, both CH4 and CO emissions appear an upward trend, and the maximum rise is 298 ppm and 277 ppm, respectively. All these are useful for the design and optimization of the combustion system in DPI NG engines.
materials science, multidisciplinary,chemistry, physical,energy & fuels
What problem does this paper attempt to address?