Abstract:The pre-peak microstructure evolution of the material is crucial in determining the strength and failure scheme of the material, but is not captured by the existing shear strength parameters models which focus on post-peak stage information. Novel concepts of pseudo-cohesion and pseudo-internal friction angle that account for both the pre-peak and post-peak stage information were proposed in this study, based on the experimentally observed response of the rock mechanics parameters to an external load (the maximum principal stress). These two parameters were analytically derived as functions of maximum principal strain, with coefficients to be determined (i.e., by applying the Mohr–Coulomb criterion with these parameters to experimental data). The dependence of pseudo-cohesion and pseudo-internal friction angle on the axial strain and confining pressure was investigated. The evolution of the strength parameters was found to relate to the propagation of micro-crack developed in the loading process, as revealed by PFC 2D simulations reproducing experiments. The results show that (1) analytical model characterizing the pseudo-cohesion and internal friction angle as the quadratic function of axial strain accurately reflects the mechanical response characteristics of the specimen; (2) before the residual stage, the pseudo-cohesion first increases and then decreases with increasing strain, while the pseudo-internal friction angle increases continuously; (3) for the sandstone specimens studied, the pseudo-cohesion at the peak stress increases by a gradually decreasing rate with increasing confining pressure, while the pseudo-internal friction angle at the peak stress decreases by a decreasing rate with the increasing confining pressure; (4) CPM well characterized the mechanical properties of rock under multiple confining pressures, as the total stress–strain curves and failure modes of numerical specimens reproduced the experimental results. The evolution of rock pseudo-shear strength parameters is closely related to the external load and the generation, propagation, and penetration process of rock cracks. The rock pseudo-shear strength parameters are gradually mobilized with the increasing load, and the propagating of cracks owing to the decrease of mobilizable maximum cohesion and the increase of mobilizable maximum internal friction angle.

RELATION BETWEEN MESO-PARAMETERS OF PARTICLE FLOW CODE AND FRACTURE TOUGHNESS OF ROCK

Numerical study on mechanical properties of grains in rock discontinuity undergoing shear

On Size Effect of Rock Joints Roughness Based on Varied Statistical Methods

Approach for determining micro-strength parameters of rock based on particle flow code

Development of a shear strength model for a rock mass containing a complex fracture system based on direct shear tests: a case study

Type I Fracture Toughness Test of Rock-like Materials Based on the Particle Flow Method

A novel obtaining method and mesoscopic mechanism of pseudo-shear strength parameter evolution of sandstone

Numerical study of related factors affecting mechanical properties of fractured rock mass and its sensitivity analysis

Influence of Mesoscopic Parameters of Weakly Cemented Rocks on Macroscopic Mechanical Properties

Numerical and Experimental Assessment of the Sandstone Fracture Mechanism by Non-uniform Bonded Particle Modeling

Numerical study of the evolution of cohesion and internal friction in rock during the pre-peak deformation process

Stress-dependent Mohr-Coulomb shear strength parameters for intact rock

Study on multi-scale damage and failure mechanism of rock fracture penetration: experimental and numerical analysis

SIMULATING TIME-DEPENDENT FAILURE OF DEEP MARBLE WITH PARTICLE FLOW CODE

Numerical investigation on permeability evolution behavior of rock by an improved flow-coupling algorithm in particle flow code

Numerical Study of the Strength and Characteristics of Sandstone Samples with Combined Double Hole and Double Fissure Defects

Influence of joint geometry and roughness on the multiscale shear behaviour of fractured rock mass using particle flow code

Discrete Element Modeling of the Effects of Cutting Parameters and Rock Properties on Rock Fragmentation

Fracture Behavior and Size Effect of UHPFRC: Experimental and Mesoscale Numerical Investigation

Sensitivity Analysis of Macroscopic Mechanical Behavior to Microscopic Parameters Based on PFC Simulation

A phase-field regularized cohesive zone model for quasi-brittle materials with spatially varying fracture properties