Abstract:The PFC is used to study the shear properties of infilled rock discontinuities, with emphasis on the effects of grain shape [reflected by the ratio of major-to senior-axis（a/b）] and combination. The results show that:（1） Grain movement and failure can be divided into five types, rolling, rolling-sliding, crushing-rolling, comminuting and rolling-crushing, depending on the normal stress and grain shape, and the microcrack evolution is different under each failure mode. The fragmentation degree of grains increases with the increasing normal stress on the whole, while it decreases with the increasing a/b. The abrasion of the discontinuity walls is more serious at higher normal stress and a/b. The tension microcracks are the dominant failure for the grains and discontinuity walls. The size distribution of clastic mixtures formed after grain crushing can be described by a power law exponent or fractal dimension D. The smaller the value of D, the lower the fragmentation degree.（2） When the shapes of the double infilled grains are identical, the surface micro-roughness affects the shear properties to a large extent. When they are different, the grains with higher a/b afford more compression and shear loads, resulting in a higher fragmentation degree. The friction between two grains also affects its surface abrasions and shear movement and failure processes.（3） The average frictional strength of infilled rock discontinuities is related to the size distribution of the clastic mixture. As a/b increases or normal stress decreases, the content of large angular fragments increase, which further leads to the increase in the overall frictional strength. An empirical formula for predicting average friction strengths of rock discontinuities infilled with grains is proposed and is preliminarily validated through the data in the literatures.

Influence of joint geometry and roughness on the multiscale shear behaviour of fractured rock mass using particle flow code

A Rough Discrete Fracture Network Model for Geometrical Modeling of Jointed Rock Masses and the Anisotropic Behaviour

On Size Effect of Rock Joints Roughness Based on Varied Statistical Methods

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Numerical study on mechanical properties of grains in rock discontinuity undergoing shear

Historical shear deformation of rock fractures derived from quantitative three-dimensional description of fracture surfaces on digital outcrop models (DOMs)

Development of a shear strength model for a rock mass containing a complex fracture system based on direct shear tests: a case study

Comparative Study on Interconnectivity Between Three-Dimensional and Two-Dimensional Discrete Fracture Networks: A Perspective Based on Percolation Theory

Theoretical Model for the Shear Strength of Rock Discontinuities with Non-Associated Flow Laws

A precise modeling method of three‐dimensional discrete fracture network based on rectangular joint model

An IFS-based fractal discrete fracture network for hydraulic fracture behavior of rock mass

A New Simplified Discrete Fracture Model for Shearing of Intersecting Fractures and Faults

Numerical Simulation Study on Flow in Single Fractures with Different Joint Roughness Coefficient

Elastic characteristics for naturally-fractured reservoirs using an integrated LSM-DFN scheme with rough contact deformation

Investigating the Influence of Joint Angles on Rock Mechanical Behavior of Rock Mass Using Two-Dimensional and Three-Dimensional Numerical Models

Shear-flow coupling characteristics of a three-dimensional discrete fracture network-fault model considering stress-induced aperture variations

A discrete fracture network based modeling scheme for analyzing the stability of highly fractured rock slope

Study on Mechanical Model for Postpeak Shear Behavior of Rock Joints Based on Degradation Characteristics of the 3D Morphology

Shear Damage Simulations of Rock Masses Containing Fissure-Holes Using an Improved SPH Method

Multi-peak deformation behavior of jointed rock mass under uniaxial compression: Insight from particle flow modeling

Physical and particle flow modeling of jointed rock block behavior under uniaxial loading