Abstract:The desulfurization wastewater evaporation technology with flue gas has been widely applied to dispose of desulfurization wastewater. This paper investigates the effect of flue gas flow rate and temperature, wastewater flow rate and initial temperature, and droplet size on the evaporation performance of the desulfurization wastewater in a spray drying tower without deflectors. The results show that the flue gas flow rate and temperature affect the evaporation performance of desulfurization wastewater. The larger flow rate and higher temperature of flue gas correspond to the faster evaporation speed and the shorter complete evaporation distance of the wastewater droplet. Decreasing the flow rate and increasing the initial temperature of the desulfurization wastewater is advantageous to enhance the evaporation speed and shorten the complete evaporation distance of the wastewater droplet. Reducing the droplet size is beneficial to improve the evaporation performance of the desulfurization wastewater. The orthogonal test results show that the factors affecting droplet evaporation performance are ranked as follows: flue gas flow rate > wastewater flow rate > flue gas temperature > wastewater initial temperature > droplet size. Considering the evaporation ratio and the complete evaporation distance, the optimal setting is 14.470 kg/s for flue gas flow rate, 385 °C for flue gas temperature, 0.582 kg/s for wastewater flow rate, 25 °C for wastewater initial temperature, and 60 μm for droplet size. These studied results can provide valuable information to improve the operational performance of the desulfurization wastewater evaporation technology with flue gas.

Achieving Water-saving Purpose by Reducing Inlet-gas Temperatures in Wet Flue Gas Desulfurization Process

Research on Influence of Service Conditions on Water Consumption of Wet Desulphurization System

Influence of circulating medium temperature on water consumption of wet FGD

STUDY ON AFFECTING FACTORS UPON WATER CONSUMPTION IN WET FGD SYSTEM

Study on Spray Condensation Performance of Desulfurization Wet Flue Gas

Promoting fine particle removal in double-tower cascade wet flue gas desulfurization system by flue gas temperature reduction

Experimental Study of a Zero Water Consumption Wet FGD System

Study on Parameter Optimization of Desulfurized Wet Flue Gas in Spray Condensation Process

Calculation of the Water Consumption and Analysis on Water Saving for the Wet Flue Gas Desulfurization System of Limestone & Gypsum

Experimental Study of the Removal of Fine Particulate Matter and Moisture from Flue Gas

The Technology of Coal-fired Flue Gas Dechlorination for Realizing Zero-discharge of Desulfurization Wastewater and Its Influences on Boiler

Numerical Investigation on the Evaporation Performance of Desulfurization Wastewater in a Spray Drying Tower without Deflectors

Experimental Study of Operating Parameters Upon Water Consumption in Wet Desulphurization System

Performance Optimization of Wet Flue Gas Desulphurization System Based on CFD Technology

Effect of Operational Parameters of Wet Flue Gas Desulfurization on Water Consumption

Coal-Fired Boiler Flue Gas Desulfurization System Based on Slurry Waste Heat Recovery in Severe Cold Areas

Analysis and Optimization of Chemical Processing Parameters for Wet Flue Gas Desulphurization System

Water-saving performance study of water conservation and plume abatement device in wet mechanical draft cooling towers

Effect of relative humidity on the desulfurization performance of calcium-based desulfurizer

Analytic Study on Approach to Adiabatic Saturation Temperature and the Control Scheme for the Amount of Water Sprayed in the Semi-Dry FGD Process

Experimental Study of Limestone/Gypsum-based Wet Process Flue Gas Desulfuration