Abstract:Kaolinite-urea intercalation complex was prepared using kaolinite as intercalation host and urea as intercalating agent. The kaolinite-urea intercalation complex was used as precursor to prepare exfoliated kaolinite by deintercalating urea molecules from the interlayers of kaolinite through ultrasonic treatment. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the as-prepared exfoliated kaolinite. A broad 001 diffraction of kaolinite with weak intensity showed the random orientation of kaolinite platelets. SEM micrograph confirmed the exfoliation of kaolinite particles with layer thickness of no more than 50 nm. The exfoliated kaolinite particles were used as filler to poly(ethylene-oxide)/LiClO4 (PEO/LiClO4) system to prepare PEO/kaolinite composites, with the aim to improve the ion conductivity and mechanical property of the PEO matrix. SEM, transmission electron microscopy (TEM), XRD and Fourier transform infrared spectroscopy (FTIR) were used to characterize the PEO/kaolinite composites. SEM and TEM micrographs exhibited a good dispersion of exfoliated kaolinite in PEO matrix. XRD results showed that the crystallinity of PEO was gradually decreasing with increased exfoliated kaolinite content. FTIR analysis indicated that the hydrogen bonding was formed between the oxygen atoms of PEO segments and the hydroxyl groups on kaolinite surface, and this interaction between PEO and kaolinite was beneficial to the decrease in crystallinity of PEO. In order to evaluate the effect of the exfoliated kaolinite on ion conductivity and mechanical property of PEO matrix, AC impedance measurement and mechanical test were carried out. The results indicated that the ion conductivity of the composites gradually increased with increased exfoliated kaolinite content and reached 6.0 x 10(-5) S/cm at filler concentration of 20 wt%. The formation of amorphous region around the exfoliated kaolinite was beneficial for the Li+ ion conduction in PEO matrix. When the exfoliated kaolinite content reached 10 wt%, the formed amorphous regions were connected to each other to form a network for the transport of Li+ in the interconnected amorphous regions, leading to a sharp increase in ion conductivity. Moreover, the prepared composites under different drying temperature exhibited different ion conductivity. The reason was attributed to the change of PEO crystallinity with drying temperature, and the change trend of the ion conductivity was consistent with that of PEO crystallinity. Under the drying temperature of 95 degrees C, the as-prepared composite possessed high ion conductivity (6.8 x 10(-5) S/cm). In addition, the Young's modulus and tensile strength of the composites were improved because of the introduction of the exfoliated kaolinite into EPO matrix. The composites showed the maximal increase of 256% and 121% in Young's modulus and tensile strength, i.e., to 165.1 MPa and 6.743 MPa respectively, compared to PEO/LiClO4 (46.3 and 3.047 MPa). Therefore, the exfoliated kaolinite was a promising filler to prepare PEO based polymer electrolyte.

Preparation and Properties of PEO-based Composite Polymer Electrolyte Thick Films Dispersed with BaTiO3

Preparation and characterization of PEO-PMMA polymer composite electrolytes doped with nano-Al 2 O 3

Preparation and Performance of Porous Polymer Electrolytes Doped with Nano-Al2O3

Preparation and Characterization of Poly(ethylene-oxide)/Kaolinite Composite Electrolyte

Fabrication and Properties of PPC/PEO/TiO2 Composite Polymer Electrolyte for Lithium-ion Battery

PEO Based Polymer Electrolyte with the Super Ionic Conductor As Filler

Electrochemical Performance of PEO 10 LiX-Li 2 TiO 3 Composite Polymer Electrolytes

Conductivity studies on a new composite polymer electrolyte PEO-LiClO4 - Li1.3Al0.3Ti1.7 (PO4)3

Characterization of (peo)liclo4‐li1.3al0.3ti1.7(po4)3 Composite Polymer Electrolytes with Different Molecular Weights of PEO

The Role of Halloy Site on Crystallinity, Ion Conductivity, Thermal and Mechanical Properties of Poly(ethylene-Oxide)/halloysite Nanocomposites

Preparation and Properties of Composite Polymer Electrolyte Modified with Nano-Size Rare Earth Oxide

Enhanced working temperature of PEO-based polymer electrolyte via porous PTFE film as an efficient heat resister

Influence of barium titanate nanofiller on PEO/PVdF-HFP blend-based polymer electrolyte membrane for Li-battery applications

Preparation and electrochemical behaviors of composite solid polymer electrolytes based on polyethylene oxide with active inorganic-organic hybrid polyphosphazene nanotubes as fillers

TiO2/(PEO)8LiClO4 composite polymer electrolytes prepared by in-situ method

Enhanced Electrochemical Proterties and Optimiazed Li+ Transmission Pathways of PEO/LLZTO‐Based Composite Electrolytes Modified by Supramolecular Combination

Enhanced Ionic Conductivity of Poly(ethylene Oxide) (PEO) Electrolyte by Adding Mesoporous Molecular Sieve LiAlSBA

Fabrication of BaTiO3 ceramic filler incorporated PVC-PEMA based blend nanocomposite gel polymer electrolytes for Li ion battery applications

Enhancement of ionic conductivity of PEO based polymer electrolyte by the addition of nanosize ceramic powders

Characteristics of PEO Incorporated with CaTiO3 Nanoparticles: Structural and Optical Properties

A Novel PEO-based Composite Polymer Electrolyte with Absorptive Glass Mat for Li-ion Batteries