Abstract:Nanocrystalline Ni-Mo alloy coatings with excellent brightness, high hardness, and corrosion resistance were prepared. Nanocrystalline Ni-Mo alloy coating with a Mo content of 14.94 at% was electrodeposited on the copper foil substrate under the optimized conditions with the current efficiency of 51.64%. The electrodeposition behavior of Ni-Mo alloy coatings was studied by cathodic polarization curve and chronopotentiometry. Chronopotentiometry showed that the nucleation rate of Ni-Mo alloys can be accelerated with the increase of current density. Meanwhile, the cathodic polarization curves show that the additives can effectively inhibit the electrodeposition of Ni-Mo alloys. The (2 0 0) and (2 2 0) diffraction peaks of Ni gradually disappeared and the grain size gradually decreased with the increase of Mo content in the alloy coating according to XRD and TEM analysis. Scanning electron microscope (SEM) and confocal microscope observation results show that the coating becomes smoother and denser with the increase of Mo content when Mo content was lower than 14.94 at%, after which the density of the coating saw a decline due to the intensified hydrogen evolution reaction. The microhardness results of the alloy coating show that the microhardness of the alloy coating is related to the solid solution strengthening, texture evolution, and plastic deformation of the alloy. Meanwhile, the alloy coating has a Hall-Petch relationship and inverse Hall-Petch relationship, and the critical grain size is 5.5 nm. The corrosion resistance of Ni-Mo alloy coating is better than that of pure Ni coating, and the corrosion resistance is optimal when the Mo content is about 15 at%. In addition, in the plating solution containing additives, the deposited Ni-Mo alloy coating is smoother and denser, and the hardness and corrosion resistance of the alloy coating is also greatly improved.

Performance Comparisons of Molybdenum Wires Before and after the Optimized Continuous Electropolishing

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

In Situ Study of Mechanical-Electrochemical Interactions during Cobalt ECMP

Electrochemical Corrosion Behavior and Theoretical Simulation of Cobalt in Chemical Mechanical Polishing Process

P‐47: Influences of Mo Film Residual Stress on Cu/Mo Interface and Undercut Performance

Optimization of electrolytic plasma polishing process and surface performance analysis for 6061 aluminum alloy

Chemical Mechanical Polishing of Mo Using H2O2 as Oxidizer in Colloidal Silica Based Slurries

A Study of a New Mechanical-Electrochemistry Polishing Method with Wire-Combined Tool

Effect of Electrolyte Concentration on the Tribological Performance of MAO Coatings on Aluminum Alloys

Impurity-free and high-efficiency modification for 30CrMo steel

Influences of Heat Treatment Process on Properties of Electroless Plating Ni-W-Mo-P Alloy

Mechanical Properties of Molybdenum Products Prepared by Using Molybdenum Powders with Different Micro-Morphologies

Study on Microstructures and Tribological Performance of Ion Plating Mo Layer

Chemical Mechanical Polishing of Molybdenum in Potassium Iodate-Based Acidic Slurries

Electrodeposition of nanocrystalline Ni-Mo alloys in pyrophosphate baths

A new polishing method for complex structural parts: moist particle electrolyte electrochemical mechanical polishing (MPE-ECMP)

Precision Electrochemical Micro-Machining of Molybdenum in Neutral Salt Solution Based on Electrochemical Analysis

Correlation of Fabrication Methods and Enhanced Wear Performance in Nanoporous Anodic Aluminum Oxide with Incorporated Molybdenum Disulfide (MoS2) Nanomaterials

The Effect of Molybdenum on the Corrosion Behaviour of the High-Entropy Alloys Co1.5crfeni1.5ti0.5mox in Aqueous Environments

Surface polishing of CoCrMo alloy by magnetorheological polishing

SAL5087 bright welding wire two acid polishing process and its effect on surface roughness