Abstract:The conventional design method of aeroservoelastic system was in frequency domain with RFA (rational function approximation) method of unsteady dynamics, which always lost its way in nonlinear unsteady dynamics such as transonic fly condition. Based on the ROM (reduced order model) of unsteady aerodynamics, a general method of active control design for aeroservoelastic system was developed. The aeroservoelastic system was divided into three subsystems: aerodynamics, structure and control subsystems whose state space models were constructed separately and then were integrated. The ROM was used to build the state space model of linear and nonlinear unsteady aerodynamics. According to the characteristics of the different objects, completely-coupled model and partially-decoupled model of aeroservoelastic system were built. Then the method was applied to designing an active control law for a two-DOF (degree-of-freedom) aeroelastic system in order to illustrate the procedures of model construction, system analysis and design of the method. The example demonstrates the wide applicability, good expansibility and excellent computational efficiency of the method. In addition, such a method can be applied to nonlinear circumstance and is well fit for multidisciplinary design optimization of aeroservoelasticity.

Design and Simulation of Active Load-reducing Control Law of Launch Vehicle

Design Method of Active Control Law Based on Reduced Order Model of Unsteady Aerodynamics for Aeroelasticity

Dynamic Modeling and Active Control of a Strap-on Launch Vehicle

Longitudinal Active Load Relief Control of Launcher Based on Fully-Actuated System Approach

Design of Active Control Law for Aeroelastic Systems via Reduced Order Models

Design of Thrust Vectoring Vertical/Short Takeoff and Landing Aircraft Stability Augmentation Controller Based on L1 Adaptive Control Law

ADRC-based Longitudinal Control for Novel Flight Vehicle with Moving Mass

Adaptive Augmented Disturbance Rejection and Load-relief Control for Launch Vehicle

Practical Design of Control Law for Flight Vehicle Soft Landing

Design and Simulation of Optimal Sliding Mode Guidance Law

Active aeroelastic control using multiple control surfaces based on a high-fidelity reduced order model

Adaptive Reduced-Order-Model-Based Control-Law Design for Active Flutter Suppression

Research on Strategy to Decrease Wind Load of Solid Rocket with Multiple-Stage Boosters

Design of active control law for aeroelastic system based on proper orthogonal decomposition reduced order model

Active Flutter Suppression Control Law Design Method Based on Balanced Proper Orthogonal Decomposition Reduced Order Model

Performance improvement-oriented reentry attitude control for reusable launch vehicles with overload constraint

A Reduced-Order-model-based Multiple-in Multiple-out Gust Alleviation Control Law Design Method in Transonic Flow

Visual simulation research of post-stall maneuverability flight control laws based on Matlab/Flightgear/Atlas

Design and Implementation of Aerodynamics Loading Control Systemfor Testing Aircraft Air Brake Flap

Optimizing and designing upper-stage separation spring of lifting-body rocket

Robust Control Design for a Nanosat Launch Vehicle