Abstract:At present, deterministic optimization methods on aerodynamic measures are usually employed to mitigate wind loads at one certain wind direction, ignoring the effects of the uncertainties in wind direction and velocity on wind loads. The uncertain optimization method with the consideration of the joint probability distribution (JPD) of wind speed and direction is hardly to conduct because it is very time-consuming and costly. In order to overcome these shortcomings, this study proposes an effective two-stage uncertain optimization method considering uncertainties in wind direction and velocity to achieve a considerable reduction of wind loads. In the first stage, the exceedance probability distribution of wind loads is determined based on the JPD and the wind load coefficients on the building, and the wind loads in the most unfavorable range of wind directions are chosen as the optimization objective. In the second stage, the optimal values of the design variables are determined by an interval optimization algorithm using the surrogate model and non-dominated sorting genetic algorithm II in the most unfavorable range of wind directions, where the surrogate model is constructed by the radial basis function method to relate the wind load coefficients to the design variables of aerodynamic measures, and can significantly improve the efficiency of the optimization algorithm. To validate the effectiveness of the proposed method, a flat-roof building with four spoilers is investigated and the rotation angles of spoilers are set as the design variables. The results show that the proposed method reduces the uplift wind loads with a 50-years return period up to 15.48% compared to the deterministic optimization method for one certain wind direction.

Research on Strategy to Decrease Wind Load of Solid Rocket with Multiple-Stage Boosters

Numerical Investigation of Unsteady Aerodynamic Characteristics of A Pitching Missile

The Effect of Variable Wind Field on the Overall Height of Meteorological Rocket

Aerodynamic and aeroacoustic characteristics of rocket sled under strong ground effect

Takeoff Analysis and Simulation of A Small Scaled Uav with A Rocket Booster

RESEARCH ON THE LOAD CONTROL OF WIND TURBINES BASED ON INDIVIDUAL PITCH TECHNOLOGY

An effective two-stage optimization method on aerodynamic measures to mitigate wind loads considering uncertainties in wind direction and velocity

Loading System and Control Strategy for Simulating Wind Turbine Loads

Numerical simulation and optimized design of a launching system with a novel charge structure

Design and optimization of booster gliding model guided rocket scheme

Numerical Investigation on the Mechanism of Solid Rocket Motor Instability Induced by Differences between On-Ground and In-Flight Conditions

Design Optimization of Chamber Pressure and Nozzle Area Expansion Ratio of Solid Rocket Motors

Dynamics of a Variable-Mass and Flexible Two-Stage Rocket System

Internal Ballistic Modeling and Simulation Analysis of High-low Pressure Low-overload Launch of Unmanned Aircraft

Optimizing and designing upper-stage separation spring of lifting-body rocket

Optimization of Flight Stability of Water Rockets by Integrated Analysis of "Dynamic Simulation System" and "Robust Design"

Solid rocket motor design employing an efficient performance matching approach

Study on Novel Yaw Error Strategy for Wind Turbines Based on a Multi-Body Dynamics Method

Numerical and wind tunnel test research on aerodynamic characteristics of high-speed rocket sled under the influence of ground effect

Ballistic Simulation and Analysis of Turntable Rotation on the Flight Stability of Anti-aircraft Rocket

Effect of Turbo-pump Bearing Supporting Stiffness and Axial Position on Critical Speed of Rotor System in Liquid Rocket Engine