Abstract:The liquid oxygen/methane staged cycle liquid-rocket engine is one of the most potential rocket engines in the future for its higher performance, higher fuel density and reusable capacity. Two working states of this liquid-rocket engine named as full-load state and half-load state are defined in this paper. Based on this liquid-rocket engine, a dual-rocket-based-combined-cycle propulsion system with liquid oxygen /air/methane as propellants is therefore proposed. The dual-rocket-based-combined-cycle system has then five working modes: the hybrid mode, pure ejector mode, ramjet mode, scramjet mode and pure rocket mode. In hybrid mode, the booster and ejector rockets driven by the full-load liquid-rocket engine work together with the purpose of reducing thrust demand on ejector rocket. In scramjet mode, the fuel-rich burned hot gas generated by the half-load liquid-rocket engine is used as fuel, which is helpful to reduce the technical difficulty of scramjet in hypersonic speed. The five working modes of dual-rocket-based-combined-cycle are highly integrated based on the full- or half-load state of the liquid oxygen/methane staged cycle liquid-rocket engine, and the unified single type fuel of liquid methane is adopted for the whole modes. Then a preliminary design of a horizontal takeoff two-stage-to-orbit launch vehicle is conducted based on the dual-rocket-based-combined-cycle propulsion system. Under an averaged baseline thrust and specific impulse, the launch trajectory to reach a low Earth orbit at 100km is optimized via the pseudo-spectral method subject to maximizing the payload mass. It is shown that the two-stage-to-orbit vehicle based on the dual-rocket-based-combined-cycle can achieve the payload mass fraction of 0.0469 and 0.0576 for polar mission and equatorial mission, respectively. Conclusively, insights gained in this paper can be usefully applied to a more detailed design of the dual-rocket-based-combined-cycle powered two-stage-to-orbit launch vehicle.

Design and optimization of booster gliding model guided rocket scheme

Multidisciplinary Design Optimization of Reentry-Powered Hypersonic Vehicles Based on Surrogate Model

Conceptual Design and Optimization of Scramjet Engines Using the Exergy Method

Takeoff Analysis and Simulation of A Small Scaled Uav with A Rocket Booster

Exploration in Booster Reuse Employing Aerosurfaces

Solid rocket motor design employing an efficient performance matching approach

Rapid ascent trajectory optimization of rocket-based combined cycle hypersonic vehicle

Rapid Optimization Method of Solid Rocket Motor Propellant with Structural Strength

Thrust-matching and optimization design of turbine-based combined cycle engine with trajectory optimization

Conceptual Study of a Dual-Rocket-based-combined-cycle Powered Two-Stage-to-orbit Launch Vehicle

An Optimization Method of Attitude Control Parameters Based on Genetic Algorithm for the Boost-Glide Rocket

Multistage rocket preliminary design and trajectory optimization using a multidisciplinary approach

Trajectory optimisation for a rocket-assisted hypersonic boost-glide vehicle

Design, Optimal Guidance and Control of a Low-cost Re-usable Electric Model Rocket

Design and Verification of Attitude Control System for a Boost-Glide Rocket

Multidisciplinary design optimization of a wide speed range vehicle with waveride airframe and RBCC engine

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

Optimum Design of a Reusable Spacecraft Launch System Using Electromagnetic Energy: An Artificial Intelligence GSO Algorithm

Index allocation for a reusable LOX/CH4 rocket engine

Trajectory optimization for hypersonic boost‐glide missile considering aeroheating

Multidisciplinary Design Optimization of Reusable Launch Vehicles for Different Propellants and Objectives