Abstract:Reducing the heat dissipation through the envelope is critical for heating energy savings in buildings . Double-layer pipe-embedded external wall (DPEW) has the advantage of load interception and low-temperature heating, and is a promising solution to reducing energy demand for heating. To gain a comprehensive understanding of the thermal performance of DPEW, a thermal network model is established in this study, which characterizes the steady heat transfer process of DPEW by the superposition of water temperature, outdoor temperature and indoor temperature. The accuracy of the proposed model is validated against experiment data in the literature. Evaluation indexes including equivalent overall heat transfer coefficient (U-value), equivalent outdoor temperature, and energy utilization rate of outer pipe or/and inner pipe are proposed based on the thermal network model of DPEW. A case study is conducted under typical winter conditions of Beijing to investigate the influence of water temperature and outdoor temperature on the thermal performance of DPEW. The results show that the energy utilization rate of DPEW increases with the increasing outdoor temperature and inner pipe water temperature, and the decreasing outer pipe water temperature, while the energy utilization rates of the outer pipe and inner pipe remain largely unaffected. At the outdoor temperature of −9 °C, the outer pipe water temperature of 10 °C and the inner pipe water temperature of 25 °C, the energy utilization rates of the outer pipe, inner pipe, and DPEW reach approximately 27 %, 89 % and 65 %, respectively. This study gives an insight into the steady-state thermal performance of DPEW, and provides guidance for its further research and application.

Heat Transfer Analysis of Pipe-embedded Building Envelopes

An active pipe-embedded building envelope for utilizing low-grade energy sources

Dynamic thermal performance of pipe-embedded building envelope utilizing evaporative cooling water in the cooling season

Energy saving potential of pipe-embedded building envelope utilizing low-temperature hot water in the heating season

Numerical Study On Energy Consumption Characteristics For Wall Insulation Structure In Hot Summer And Cold Winter Zone

Performance evaluation of an active pipe-embedded building envelope system to transfer solar heat gain from the south to the north external wall

Finite Element Analysis of 3D Heat Transfer of Typical Thermal Bridge of Self-Thermal Insulation in Hot-Summer and Cold-Winter Zone

Numerical Study on Wall Insulation Construction Affecting the Energy Consumption under the Intermittent and Loculose Energy Use

Experimental validation of a semi-dynamic simplified model of active pipe-embedded building envelope

Study on thermal and energy-saving performances of pipe-embedded wall utilizing low-grade energy

Research on heat transfer mechanism and performance of a novel adaptive enclosure structure based on micro-channel heat pipe

Numerical Analysis of the Influencing Factors on the Performance of a Pipe-Embedded Window Operated in Summer

A semi-dynamic model of active pipe-embedded building envelope for thermal performance evaluation

A simplified method for the thermal performance analysis of double-layer pipe-embedded external wall

7th International Building Physics Conference IBPC 2018 Proceedings: Healthy, Intelligent and Resilient Buildings and Urban Environments

Numerical study on energy efficiency and economy of a pipe-embedded glass envelope directly utilizing ground-source water for heating in diverse climates

A study on pipe-embedded wall integrated with ground source-coupled heat exchanger for enhanced building energy efficiency in diverse climate regions

Thermal performance of double-layer pipe-embedded envelope with low-grade energy for heating

Numerical investigation of the energy efficiency of a serial pipe-embedded external wall system considering water temperature changes in the pipeline

Monitoring and Analysis of Heat Emission of Domestic Hot-water Pipe Network in Student Villages of Zhejiang University

Predicting method for annual dynamic performance of pipe-embedded windows