The Effect of Yield-To-Ultimate Ratio on the Bolted Connection under Static Shear

PAN Bin,SHI Yongjiu,WANG Yuanqing

DOI: https://doi.org/10.3969/j.issn.1002-8528.2012.09.022

2012-01-01

Abstract:Ductility degradation due to the increase of yield-to-ultimate ratio makes a dent in bolted connection under static shear,which limited the application of high strength steel.The paper summarized experimental research on bolted connection under static shear of different strength grade steel,and analyzed the effect of yield-to-ultimate ratio on bolted connection.It was found that for a particular type of fastened the variation in shear strength caused by the type of connected material was usually very small.The reduction in bearing resistance for small e2 or p2 did not need to be so large.The design resistance according to yielding of the gross cross-section was critical for mild steel,to prevent large member elongation.But for high strength steel,the design resistance given by rupture of the net area was critical because the tensile resistance of the net section was reached before the yielding of the gross area.It is suggested that further experimental study and parametric analysis should be carried out to get quantitative conclusions for reasonable engineering design.