Abstract:One of the advantages of perovskite solar cells is able to be compatible with low-cost large-scale solution process via roll-to-roll technique. Green solvent engineering plays an important role in large-scale manufacture. N-methyl pyrrolidone (NMP) is considered to be low toxicity and biodegradable, which is less harmful to the human body and the environment. However, it is difficult to achieve high film quality for NMP-processed perovskite film in a short time. In this communication, we develop a two-step green anti-solvent engineering to fast tune the morphology of the NMP-processed perovskite film. The first step is to deposit ethyl acetate (EA) on top of the precursor film to induce fast nucleation. Secondly, methylammonium chloride (MACl) solution dissolved in isopropanol (IPA) is added to affect the crystal growth process and subsequently form a two-layer structured perovskite film including MAPbI3 as a bottom layer and mixed MAPbI3/MAPbIxCl1-x as an upper layer, respectively. The upper layer shows significantly enhanced degree of crystallinity and reduced trap states. It has been recognized that MAPbIxCl1-x has a wide bandgap with a higher LUMO level and a lower HOMO level than that of MAPbI3. Thus, the enrichment of Cl based perovskite near/at the surface can not only promote the efficient charge transfer, but also improve the VOC of PSCs. Furthermore, the limited content of MAPbIxCl1-x in MAPbI3 barely affects the whole absorption of the perovskite and thus JSC of the device. Thus, the as-prepared inverted PSC yields a high PCE of 16%, mainly attributing to obviously improved VOC and JSC, while the reference device containing the perovskite layer only treated by EA shows a PCE of 14.36%. Notably, NMP-processed perovskite film exhibits high transmittance of 22% in the 380−780 nm wavelength range, offering great potential in semi-transparent PSCs.

Consecutive Morphology Controlling Operations for Highly Reproducible Mesostructured Perovskite Solar Cells.

Highly reproducible perovskite solar cells via controlling the morphologies of the perovskite thin films by the solution-processed two-step method

Morphology Evolution of High Efficiency Perovskite Solar Cells via Vapor Induced Intermediate Phases

Film Morphology Control for High Efficiency Perovskite Solar Cells

A Polymerization‐Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells

Morphology Control of the Perovskite Films for Efficient Solar Cells.

Morphology Control towards Green Solvent System Processed High Performance Semitransparent CH3NH3PbI3 Film for Perovskite Solar Cell

Controlling Homogenous Spherulitic Crystallization for High-Efficiency Planar Perovskite Solar Cells Fabricated under Ambient High-Humidity Conditions

Highly Efficient Perovskite Solar Cells with Precursor Composition-Dependent Morphology

(Invited) Uniform Nanostructures for Highly Efficient and Reproducible Perovskite Solar Cells

Highly Reproducible Fabrication of Perovskite Films with an Ultrawide Antisolvent Dripping Window for Large‐Scale Flexible Solar Cells

Controlled Growth of Textured Perovskite Films Towards High Performance Solar Cells

2,2‐Azodi(2‐Methylbutyronitrile)‐coordinated Intermediate Phase Engineering for Efficient and Stable Perovskite Solar Cells

Controllable Grain Morphology Of Perovskite Absorber Film By Molecular Self-Assembly Toward Efficient Solar Cell Exceeding 17%

Morphology Optimization of Perovskite Films for Efficient Cells and Modules through Solvent Engineering

Solvent-assisted Growth of Organic–inorganic Hybrid Perovskites with Enhanced Photovoltaic Performances

Synergic Solventing-out Crystallization with Subsequent Time-Delay Thermal Annealing of PbI2 Precursor in Mesostructured Perovskite Solar Cells

Spontaneously supersaturated nucleation strategy for high reproducible and efficient perovskite solar cells

Morphology control of SnO2 layer by solvent engineering for efficient perovskite solar cells

A Catalyst-Like System Enables Efficient Perovskite Solar Cells

Morphology Control of Planar Heterojunction Perovskite Solar Cells with Fluorinated Pdi Films As Organic Electron Transport Layer